On 25/01/14 01:24, Moti Asayag wrote: > > > ----- Original Message ----- >> From: "Federico Alberto Sayd" <fs...@uncu.edu.ar> >> To: users@ovirt.org >> Sent: Friday, January 24, 2014 4:06:11 PM >> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not >> properly configured" >> >> On 24/01/14 08:31, Moti Asayag wrote: >>> >>> ----- Original Message ----- >>>> From: "Federico Alberto Sayd" <fs...@uncu.edu.ar> >>>> To: users@ovirt.org >>>> Sent: Thursday, January 23, 2014 3:57:53 PM >>>> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not >>>> properly configured" >>>> >>>> On 23/01/14 07:02, Moti Asayag wrote: >>>>> ----- Original Message ----- >>>>>> From: "Federico Sayd" <fs...@uncu.edu.ar> >>>>>> To: users@ovirt.org >>>>>> Sent: Wednesday, January 22, 2014 2:22:01 AM >>>>>> Subject: [Users] Centos 6.5 and bonding: "A slave interface is not >>>>>> properly configured" >>>>>> >>>>>> Hello: >>>>>> >>>>>> I am having problems with bonding >>>>>> >>>>>> I have installed Centos 6.5 in order to use it as host. I configured >>>>>> eth0 >>>>>> with the vlan of the management network (Vlan 70). Then I registered the >>>>>> host to the engine (3.3.2-1-el6) and the engine installed oVirt in the >>>>>> host >>>>>> without problem. Ovirtmgmt was created automatically and bridged with >>>>>> eth0.70. >>>>>> >>>>>> Now I need to bond a second network interface (eth1) with eth0. But when >>>>>> I >>>>>> try to bond the nics, I get the next error: >>>>>> >>>>> Could you describe how you've created the bond ? via webadmin setup >>>>> networks >>>>> dialog or via api ? >>>>> >>>>> >>>> Via webadmin Setup Network (Web GUI) >>> Does the setup dialog presents the new configuration when you create the >>> bond ? >>> Meaning, does it draw the following ? >>> eth0 -- >>> |--bond0 --- ovirtmgmt (vlan 70) >>> eth1 -- >>> >>> If it does, this is simply bug in the UI which should have better construct >>> the parameters to the setup networks. >>> >>> Could you open a bug for it ? >>> >>> You may use the setup networks api (via rest-client or using the sdk) to >>> specify >>> the target configuration. >>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >> No, the bond is never displayed in the web UI, the error prevents the >> bond creation. I already solved the problem, only I think that would be >> fine if the UI error be more explicit and include info about to the >> interface or interfaces with problematic configurations. >> >> I don't know if supervdsm.log or vdsm.log make reference to the >> interfaces that have unacceptable configurations. >> > > The error indicates that the parameters sent from the UI to that engine > weren't constructed properly. In this case the engine failed the action > and it never reached the host. > > Lior, could you verify this scenario and see which fields left with > improper values on the UI side ? >
Apologies for the delay in responding. I tried running a similar scenario via the GUI on my deployment and it worked fine (and this part of the code shouldn't have changed recently). So I suspect the problem isn't with the Setup Networks GUI. > _____________________________________________ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users