--- Nguyen Duy Tho <[EMAIL PROTECTED]> wrote:
> thi`
> > chu*a ddu*o*.c. Mi`nh co' go*?i ke`m mo^.t so^'
> > output:
> >
> > [EMAIL PROTECTED] tuan]# wpa_gui
> > Session management error: Authentication Rejected,
> > reason : None of the authentication protocols
> > specified are supported and host-based
> authentication
> > failed
> >
>
> None of the authentication protocols
> specified are supported and host-based
> authentication
> failed
>
> Va^.y la` kho^ng du`ng TKIP gi` he^'t
>
> > Selected interface 'eth1'
> > Trying to connect to
> '/var/run/wpa_supplicant/eth1'
> > Failed to open control connection to
> wpa_supplicant.
> > PING failed - trying to reconnect
> > Trying to connect to
> '/var/run/wpa_supplicant/eth1'
> > PING failed - trying to reconnect
> > Trying to connect to
> '/var/run/wpa_supplicant/eth1'
> > [EMAIL PROTECTED] tuan]#
> >
> > [EMAIL PROTECTED] network-scripts]# /sbin/service
> > wpa_supplicant status
> > wpa_supplicant dead but subsys locked
> >
> > Du`ng [EMAIL PROTECTED] network-scripts]#vi
> > /var/run/wpa_supplicant/eth1 thi` bi. ba'o lo^~i
> > permission denied
> >
> > Dda^y la` config cua wpa_supplicant.conf:
> >
> > ctrl_interface=/var/run/wpa_supplicant
> > #ctrl_interface_group=wheel
> > ctrl_interface_group=root
> >
> > network={
> > ssid="BD"
> > psk="aaabbbcccddd"
> > key_mgmt=WPA-PSK
> > proto=WPA
> > pairwise=TKIP
> > group=TKIP
> > }
> >
> # cat /etc/wpa_supplicant.conf
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
>
> network={
> ssid="BD"
> scan_ssid=1
> psk="aaabbbcccddd"
> key_mgmt=WPA-PSK
> }
>
>
> Du`ng group wheel thi` hay ho+n vi` the^m user va`o
> group na`y thi` user
> ddo' la` admin.
> #/usr/sbin/wpa_supplicant -ieth1 -c
> /etc/wpa_supplicant.conf -d -w
>
> cha.y thu+?
> #wpa_cli
>
> help dde^? xem ca'c options.
> status xem status
>
>
> TND
Mi`nh dda~ la`m nhu* ba.n, nhung va^~n bi. ba'o lo^~i
nhu* sau:
[EMAIL PROTECTED] tuan]# /usr/sbin/wpa_supplicant -ieth1
-c /etc/wpa_supplicant/wpa_supplicant.conf -d -w
Initializing interface 'eth1' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver
'default' ctrl_interface 'N/A'
Configuration file
'/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file
'/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0 (from group name 'root')
Priority group 0
id=0 ssid='BD'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=18
enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
Own MAC address: 00:04:23:86:69:82
wpa_driver_hostap_set_wpa: enabled=1
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0
seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0
seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0
seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0
seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_countermeasures: enabled=0
wpa_driver_hostap_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=2):
42 44
BD
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
wpa_driver_hostap_set_drop_unencrypted: enabled=0
wpa_driver_hostap_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
[EMAIL PROTECTED] tuan]#
Trong lu'c ddo' xem wpa_client thi` tha^'y nhu* sau:
[EMAIL PROTECTED] tuan]# /usr/sbin/wpa_cli
wpa_cli v0.4.8
Copyright (c) 2004-2005, Jouni Malinen
<[EMAIL PROTECTED]> and contributors
This program is free software. You can distribute it
and/or modify it
under the terms of the GNU General Public License
version 2.
Alternatively, this software may be distributed under
the terms of the
BSD license. See README and COPYING for more details.
Selected interface 'eth1'
Interactive mode
> status
wpa_state=SCANNING
>
Va^.y la` bi. gi` va^.y ba.n?
Tua^'n
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
VietLUG-users mailing list
VietLUG-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vietlug-users
