I think the air is both the cooling fluid and source of fuel. On Monday, August 13, 2012, David Roberson wrote:
> I think that the hole in the center of the device is open to allow cooling > fluid to flow through. This appears to be the hottest region of Rossi's > reactor. Notice the bright color seen through the hole. > > Dave > -----Original Message----- > From: Andre Blum <andre_vor...@blums.nl <javascript:_e({}, 'cvml', > 'andre_vor...@blums.nl');>> > To: vortex-l <vortex-l@eskimo.com <javascript:_e({}, 'cvml', > 'vortex-l@eskimo.com');>> > Sent: Mon, Aug 13, 2012 9:28 am > Subject: Re: [Vo]:1200 degrees E-cat operating at 1 bar? > > As far as I understand, but I could be wrong, the hot cat reactor is not > open at all. > > These are two concentric tubes with their ends somehow closed with some > kind of appropriate 'putty'. > So: the part that you are seeing as open is the hole in the donut, but it > is the hollowness of the donut itself that is the reaction chamber. > > Unclear to me is how they filled that with the gas and at what pressure. > Then again, Rossi says he uses some metal hydride, not gas per se. > > Andre > > > > Andre > > On 08/13/2012 04:25 AM, Teslaalset wrote: > > Group, > Recent posted foto that seems to represent a test Rossi test unit > generating 1200 degrees C heat, made me wonder: > Is the new unit operating at 1 Bar gas pressure? It seems to be an open > setup to me. > Past explanation by Rossi gave me the impression the E-cat works at quite > higher gas pressures. > Is it just me than is puzzled about this observation? > > >