Hi Michael,
1) Unfortunately, there is no way to set the target root device in the
voyage.update. You will need to fix it manually
## Put your CF back to knoppix
mount /dev/<CF device on knoppix> /mnt/cf
vi /mnt/cf/etc/lilo.conf # and change root= line from hda to hdb
chroot /mnt/cf lilo -C /etc/lilo.conf
umount /mnt/cf
2) Pick option 3 (4511/4521) in voyage.update to have PCMCIA support.
Michael Grollman wrote:
I am trying to build a voyage 0.2 boot disk for a Soekris 4801 with a
PCMCIA slot. I am building this on a full x86 PC using a Knoppix
boot. I have a CF card drive in the full PC set to /dev/hda. Two
issues:
ISSUE 1: It no boot. When I make the disk and then move it to the
Soekris 4801 to boot it, I get the following:
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: max request size: 128KiB
hdb: 1001952 sectors (512 MB) w/1KiB Cache, CHS=994/16/63
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
VFS: Cannot open root device "301" or unknown-block(3,1)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(3,1)
The Soekris seems to be seeing this as /dev/hdb, even though in the
Soekris Bios is it set as FLASH=Primary. Is this an issue with how I
am building the voyage disk, or how I am setting up the Soekris Bios?
Soekris BIOS is set as follows (1.28):
comBIOS Monitor. Press ? for help.
> show
ConSpeed = 9600
ConLock = Disabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Enabled
FLASH = Primary
BootDelay = 5
FastBoot = Disabled
BootPartition = Disabled
BootDrive = 80 FF FF FF
ShowPCI = Enabled
Reset = Hard
ISSUE 2: No config choice on voyage.update menu for a 4801 with a
slot card in it.
Explains itself.
Any help is greatly appreciated, as this has been kicking my rear for
a number of days now. I am sure there is a simple fix short of
re-writing all the scripts till I find the combo that works, and I am
just missing it.
Thanks,
- Michael
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.5.6/339 - Release Date: 5/14/2006
------------------------------------------------------------------------
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)
V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - Senao NMP-8602 Plus (400mW) is now in stock!
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux