Hi Jeffery:
pre-up line should be removed.
Regards,
Punky
[EMAIL PROTECTED] wrote:
Voyage team,
My name is Jeff Rager. I am trying to bring up a dual radio AP
using Voyage .3pre1. I have not gotten any errors while configuring
ath0 for master mode but, there's nothing there when I try look for it
with my laptop. Here is my config.
auto ath0
iface ath0 inet static
address 192.168.1.15
netmask 255.255.255.0
broadcast 10.1.10.255
gateway 192.168.1.254
pre-up wlanconfig ath0 create wlandev wifi0 wlanmode ap
madwifi-base wifi0
wireless-mode Master
up iwpriv ath0 mode 3
up iwconfig ath0 mode master
up iwconfig ath0 essid voyage
up iwconfig ath0 txpower auto
up iwconfig ath0 enc off
up iwconfig ath0 rate auto
up nat.sh ath0 eth0 "192.168.1.14/24"
I don't know why the pre-up line is in there but, it was there by default.
Thanks in advance
Jeff
------------------------------------------------------------------------
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)
V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New stock for Senao NMP8601 and NMP8602 (100mW)!
- New low price for Senao NMP-8602 Plus (400mW)!
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux