Hi Veli-Matti,
No idea. It didn't happen to me before. If WRAP BIOS is 38400, then
when running voyage.update you set 38400, everything should be fine.
Options are:
1) reinstall again
2) use voyage-current
3) check /etc/inittab and /boot/grub/menu.lst in CF.
What Linux distro do you run for installing voyage?
- Punky
Veli-Matti Riepula wrote:
I've selected the same line rate as is used by WRAP BIOS by default (38400)
and target console as "serial terminal" (if I remember the option name
correctly). I do see some install notes where line rate of 9600 is
mentioned, do you mean that I would need to use different serial line rate
than what the WRAP BIOS is using? I thought that as I can see the notes
about "GRUB loading" then the issue would not be in the line rate.
Thanks,
Veli-Matti
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)
V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock!
- New low price for Senao NMP-8602 Plus (400mW)!
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
