Hi MIchael, last question. I have to connet 3/4 of this adapter to same Alix box with Voyage linux. It will works from your experience? Thanks and good night
2012/1/18 Michael Steinmann <mike.steinm...@gmail.com> > I have such cables, and they are fully supported by Linux. > AFAIK there is no multiple adapter chipset, see > http://www.silabs.com/products/interface/usbtouart/Pages/usb-to-uart-bridge.aspx > There are even (windows) tools to completely rename the PID/VID and set > the product string, see: > > http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/Software/an144sw.zip&src=SoftwardDownloadsWebPart > > I've produced PCBs with the CP2102 and I really can recommend them, let me > know if you want to go that road... > > Best regards, > Michael Steinmann > > > > > 2012/1/18 Pippo Pippo 77 <pippopipp...@email.it> > >> Hi Michael, >> and thanks for your help. >> I have a couple of question regarding cp210x adapter, and I would >> appreciate if you can help me. >> >> 1) Do voyage 0.5 with 2.6 Branck kernel have driver for this? >> 2) Do voyage 0.8 with 3.0 kernse have driver too? >> 3) Do you know if exist multiple adapter based on this chipset? For >> example 1 USB but 2/4 serial Port? >> >> >> Many Thanks >> >> >> 2012/1/18 Michael Steinmann <mike.steinm...@gmail.com> >> >>> Hi, >>> >>> I had bad experiences with Profilic based adaptors, they are a POS! >>> Get a silicon labs cp210x based adaptor, which I think are even better >>> than those from FTDI. >>> >>> >>> http://www.alibaba.com/product-gs/288753118/cp2102_usb_rs232_cable_VCC_GND.html >>> >>> http://connectingcables.en.alibaba.com/product/326571577-210803458/CP2102_FT232_PL2323_optional_RS232_to_USB_adapter_cable.html >>> >>> -Michael >>> >>> >>> 2012/1/18 Pippo Pippo 77 <pippopipp...@email.it> >>> >>>> Hi, >>>> i need to connet 2 PL2303 serial converter in order to get 2 serial >>>> port. >>>> I tried this with voyage 0.8 and voyage 0.5, and behaviour is the same. >>>> >>>> When I connect the converters, i got some message in dmesg log, that >>>> told me that converters is attached to /dev/ttyUSB0 and /dev/ttyUSB1. >>>> >>>> If i use this converter one by one, it work without problem, but i need >>>> to use it together with 2 modem at same time. >>>> In this case, the second device I try to open with minicom, it would >>>> not connect and i got this message into dmesg log: >>>> >>>> *pl2303_open - failed submitting interrupt urb, error -28* >>>> >>>> I tried with Voyage 0.8 with new kernel but problem persist. Useing >>>> device one a time, works perfectly, but together not, the second i try to >>>> use i got this interrupt urb error. >>>> What can cause this? What can i try? >>>> >>>> Any help would be appreciated. Many Thanks in Advance. >>>> >>>> Marco >>>> >>>> _______________________________________________ >>>> Voyage-linux mailing list >>>> Voyage-linux@list.voyage.hk >>>> http://list.voyage.hk/mailman/listinfo/voyage-linux >>>> >>>> >>> >> >
_______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux