Hi Achim,
What does the following commands shows?
~# cat /boot/config-3.2.6-voyage |egrep "LEDS_G|GPIO_CS|ALIX"
~# cat /proc/cmdline
and check dmesg output something relate to alix or led:
On 3/9/2012 6:25 PM, Achim Vollhardt wrote:
Hi Punky,
changed the switch in menu.lst to alix.force=1, but still no LEDs and no
/dev/watchdog.
Note: You must still enable the drivers for GPIO and LED support
(GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs
How is this done? Sorry for the likely stupid question.. I am new to Linux and
tried google, but with little success..
Thanks,
Achim
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage ONE (http://linux.voyage.hk/voyage-one)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
