Hi All, I am trying to enable the SIM slot under the RF card but with no success whatsoever. I'm using Voyage 0.8. A bit of searching landed me to the following steps:
*echo 1 > /sys/class/gpio/exportecho "out" > /sys/class/gpio/GPIO1/directionecho 1 > /sys/class/gpio/GPIO1/value* But when I do '* echo 1 > /sys/class/gpio/export * *' , it says "invalid argument".* *Also i cannot find anything under /sys/class/gpio except export and unexport.* I have the feeling that the driver itself in not installed or may need to be reconfigured. Please tell me from where to get the GPIO driver?? -- Thanks and Regards Abhay Gupta -- This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this message in error, please notify Symstream Technology Group immediately by replying to the message and deleting it from your computer. Messages sent to and from us may be monitored. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this message, or any attachment, that have arisen as a result of e-mail transmission. If verification is required, please request a hard-copy version. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company. ------------------------------
_______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
