several sections of that stuff gets heavy. I pushed 100' up the inside of a tower once. We used it for the power cable coming down from a windmill. Dropped a weight on a fishing line for the pull string pull.
On Fri, Mar 06, 2009 at 02:26:21PM -0500, RickG wrote: > I stacked 15 - 20' sections of the grey pvc up to the 300' level where our > equipment was located. What a job that was! -RickG > > On Fri, Mar 6, 2009 at 11:30 AM, Joe Miller <joe.mil...@dslbyair.com> wrote: > > > > > Here is an idea for the tower sites....Run your cat5 in electrical conduit, > > the gray PVC type. That way the cat5 will be protected from the weather. > > I've done this and I haven't had to replace cat5 on the towers on over 3 > > years now. > > > > > > --- On Fri, 3/6/09, Marlon K. Schafer <o...@odessaoffice.com> wrote: > > > > > From: Marlon K. Schafer <o...@odessaoffice.com> > > > Subject: Re: [WISPA] Knowing when to stop doing installs yourself,they > > are for the young > > > To: joe.mil...@dslbyair.com > > > Date: Friday, March 6, 2009, 10:06 AM > > > I have had a few customers look at us crosswise. A couple > > > have even asked for wall plates, or had us install ethernet > > > jacks. We'll do this if asked, but I don't carry > > > the parts with me. > > > > > > I also try REALLY hard to NOT put any ethernet wall plates > > > in. I don't want the extra connection in a poe > > > situation. It's probably fine, but as an ex lineman I > > > know that connections are almost always the reason for a > > > failure so I want the fewest possible. > > > > > > We try to hide all cable as much as possible, we ask for a > > > vacuum to clean up any drillings, we do NOT leave the little > > > ends from the cat5 crimps laying around - not even outside. > > > > > > Hell, until recently we always ran indoor WHITE cat 5 > > > cable. People REALLY liked that, I have just gotten tired > > > of cables with water in them. Luckily it seems to almost > > > exclusively happen at my towers not at the customer's > > > sites. It's usually cheap and easy to replace the bad > > > cable and ruined poe. But I hate service calls! > > > > > > Sure wish I could find a double insulated white cable to > > > use instead of this black stuff we're using now. > > > > > > laters, > > > marlon > > > > > > ----- Original Message ----- From: "Joe Miller" > > > <joe.mil...@dslbyair.com> > > > To: "Marlon K. Schafer" > > > <o...@odessaoffice.com> > > > Sent: Friday, March 06, 2009 7:59 AM > > > Subject: Re: [WISPA] Knowing when to stop doing installs > > > yourself,they are for the young > > > > > > > > > > > > > > I just had to ask......very interesting. > > > > > > > > > > > > --- On Fri, 3/6/09, Marlon K. Schafer > > > <o...@odessaoffice.com> wrote: > > > > > > > >> From: Marlon K. Schafer > > > <o...@odessaoffice.com> > > > >> Subject: Re: [WISPA] Knowing when to stop doing > > > installs yourself,they are for the young > > > >> To: joe.mil...@dslbyair.com, "WISPA General > > > List" <wireless@wispa.org> > > > >> Date: Friday, March 6, 2009, 9:51 AM > > > >> Not at all. We hide the holes behind a desk or > > > something > > > >> when ever > > > >> possible. You'll never notice them. Unlike a > > > big, > > > >> ugly wall plate. > > > >> > > > >> marlon > > > >> > > > >> ----- Original Message ----- From: "Joe > > > Miller" <joemiller...@yahoo.com> > > > >> To: "WISPA General List" > > > >> <wireless@wispa.org> > > > >> Sent: Friday, March 06, 2009 6:40 AM > > > >> Subject: Re: [WISPA] Knowing when to stop doing > > > installs > > > >> yourself,they are > > > >> for the young > > > >> > > > >> > > > >> > > > > >> > Marlon, > > > >> > > > > >> > You are joking......right? > > > >> > > > > >> > > > > >> > --- On Fri, 3/6/09, Marlon K. Schafer > > > >> <o...@odessaoffice.com> wrote: > > > >> > > > > >> >> From: Marlon K. Schafer > > > >> <o...@odessaoffice.com> > > > >> >> Subject: Re: [WISPA] Knowing when to stop > > > doing > > > >> installs yourself, they > > > >> >> are for the young > > > >> >> To: "WISPA General List" > > > >> <wireless@wispa.org> > > > >> >> Date: Friday, March 6, 2009, 8:30 AM > > > >> >> Who uses wall plates anyway? We just try > > > to get > > > >> the hole > > > >> >> right at the top > > > >> >> of the baseboards. Then, someday when > > > all this is > > > >> gone and > > > >> >> some new > > > >> >> technology (TV band with no external > > > antenna?) > > > >> replaces it > > > >> >> they'll just have > > > >> >> to plug one small hole and give it a dab > > > of paint! > > > >> >> marlon > > > >> >> > > > >> >> ----- Original Message ----- >> > > > From: "Scott Reed" > > > >> >> <scottr...@onlyinternet.net> > > > >> >> To: "WISPA General List" > > > >> >> <wireless@wispa.org> > > > >> >> Sent: Thursday, March 05, 2009 9:08 AM > > > >> >> Subject: Re: [WISPA] Knowing when to stop > > > doing > > > >> installs > > > >> >> yourself, they are > > > >> >> for the young > > > >> >> > > > >> >> > > > >> >> > Don't they still make plates > > > with just a > > > >> 1/4" > > > >> >> hole in it. No need to > > > >> >> > drill. > > > >> >> > > > > >> >> > > > > >> >> > > > > >> >> > George Rogato wrote: > > > >> >> >> I was trying to drill a hole > > > into a blank > > > >> wall > > > >> >> plate. All of the sudden, > > > >> >> >> it shattered into about 10 > > > pieces. > > > >> >> >> > > > >> >> >> That happens a lot with a > > > typical > > > >> bakerlite type > > > >> >> wall plate. > > > >> >> >> > > > >> >> >> Next time you buy blank plates, > > > try to > > > >> find the > > > >> >> lexan flexible ones. > > > >> >> >> Everyone makes them, they are > > > rubber like > > > >> and when > > > >> >> you drill a hole in > > > >> >> >> it, it doesn't crack or > > > shatter. > > > >> >> >> They come in white ivory etc and > > > like I > > > >> said, > > > >> >> everyone makes them , > > > >> >> >> Leviton, eagle, p&s, hubble > > > etc. > > > >> >> >> > > > >> >> >> They cost no more. > > > >> >> >> > > > >> >> >> > > > >> >> >> > > > >> >> >> > > > >> >> >> > > > >> >> > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> >> >> WISPA Wants You! Join today! > > > >> >> >> http://signup.wispa.org/ > > > >> >> >> > > > >> >> > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> >> >> > > > >> >> >> WISPA Wireless List: > > > wireless@wispa.org > > > >> >> >> > > > >> >> >> Subscribe/Unsubscribe: > > > >> >> >> > > > >> http://lists.wispa.org/mailman/listinfo/wireless > > > >> >> >> > > > >> >> >> Archives: > > > >> >> > > > http://lists.wispa.org/pipermail/wireless/ > > > >> >> >> > > > >> >> >> > > > >> >> > > > >> > > > ------------------------------------------------------------------------ > > > >> >> >> > > > >> >> >> > > > >> >> >> No virus found in this incoming > > > message. > > > >> >> >> Checked by AVG - www.avg.com > > > >> >> >> Version: 8.0.237 / Virus > > > Database: > > > >> 270.11.8/1985 - > > > >> >> Release Date: 03/05/09 > > > >> >> >> 07:54:00 > > > >> >> >> > > > >> >> >> > > > >> >> > > > > >> >> > -- >> > Scott Reed > > > >> >> > Sr. Systems Engineer > > > >> >> > GAB Midwest > > > >> >> > 1-800-363-1544 x4000 > > > >> >> > Cell: 260-273-7239 > > > >> >> > > > > >> >> > > > > >> >> > > > > >> >> > > > > >> >> > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> >> > WISPA Wants You! Join today! > > > >> >> > http://signup.wispa.org/ > > > >> >> > > > > >> >> > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> >> > > > > >> >> > WISPA Wireless List: > > > wireless@wispa.org > > > >> >> > > > > >> >> > Subscribe/Unsubscribe: > > > >> >> > > > > >> http://lists.wispa.org/mailman/listinfo/wireless > > > >> >> > > > > >> >> > Archives: > > > >> http://lists.wispa.org/pipermail/wireless/ > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> >> WISPA Wants You! Join today! > > > >> >> http://signup.wispa.org/ > > > >> >> > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> >> > > > >> >> WISPA Wireless List: wireless@wispa.org > > > >> >> > > > >> >> Subscribe/Unsubscribe: > > > >> >> > > > http://lists.wispa.org/mailman/listinfo/wireless > > > >> >> > > > >> >> Archives: > > > >> http://lists.wispa.org/pipermail/wireless/ > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> > WISPA Wants You! Join today! > > > >> > http://signup.wispa.org/ > > > >> > > > > >> > > > > > -------------------------------------------------------------------------------- > > > >> > > > > >> > WISPA Wireless List: wireless@wispa.org > > > >> > > > > >> > Subscribe/Unsubscribe: > > > >> > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > >> > > > > >> > Archives: > > > http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- /* Jason Philbrook | Midcoast Internet Solutions - Wireless and DSL KB1IOJ | Broadband Internet Access, Dialup, and Hosting http://f64.nu/ | for Midcoast Maine http://www.midcoast.com/ */ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/