Probably one for the main mailing list (https://wsjtx.groups.io/g/main) rather than the dev mailing list
That said, can you describe your whole cable setup please? The issue may be obvious. Tom M0LTE On Sun, 16 Jan 2022 at 16:06, Richard Shaw via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Fedora Linux 35 > hamlib master (as of a couple of days ago) > WSJT-X 2.5.4 > > That being said, this has been a problem for some time for me over the > last couple of hamlib releases and several WSJT-X releases. Mike has worked > with me a couple of times to fix this, but it never STAYS fixed. > > When trying to TX in WSJT-X I get rapid relay clatter. Sometimes it's only > been when using flrig, sometimes with both flrig and hamlib, which is the > case right now. > > Running Flrig + Fldigi works fine. > Running rigctl{,d} and putting the radio in TX works fine. > Trying "Test PTT" in WSJT-X works fine > > But anytime I try to make a contact or press the PTT button I get rapid TX > relay clatter. The audio is turned all the way down so it can't be too much > audio signal, and anyway that usually goes into TX fine and then shuts down > the radio when that happens. > > Here's a link to the rigctl log: > https://www.dropbox.com/s/js4fiixbnzm9tsg/WSJT-X_RigControl.log > > Thanks, > Richard > KF5OIM > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel