The "nv" driver in 4.2.0 didn't support flat panels. Run one of the 4.2.99.x snapshots and put:
Option "FlatPanel" in the Section "Device". Mark. On Fri, 31 Jan 2003, David Shifflett wrote: > Thanks for the help. > I added that option to my Monitor Section. > Where would I find options like the one you > mentioned documented? > I don't mind RTFMing, but I don't know where > the manual is. > > Now the monitor doesn't go into power saving mode, > but nothing is displayed, I still have a blank/black screen. > The X processes (X server, fvwm, xinit, xterm, etc) > are all running, but nothing is displayed. > > Any other ideas to try? > Are my default modelines OK? > On the RedHat version it has modelines > in the config, should I copy them over and try those? > -------------------------------------------------- > Here are the modelines from the log > (**) NV(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) NV(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 > 772 808 +hsync +vsync > (**) NV(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 > 631 +hsync +vsync > (**) NV(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) NV(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 > -hsync -vsync > -------------------------------------------------- > > Thanks, > David Shifflett > Here is the output of the command 'startx': > Is the error/warning 'Input Method Open Failed' a problem > or something to be ignored? > ------------------------------------------------------------------------------------- > XFree86 Version 4.2.0 (for OpenBSD) / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: OpenBSD 3.1 i386 > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 31 10:50:51 2003 > (==) Using config file: "/etc/X11/XF86Config" > Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, > removing from list! > Warning: locale not supported by Xlib, locale set to C > Warning: X locale modifiers not supported, using default > Warning: Input Method Open Failed > Failed to open input method > X connection to :0.0 broken (explicit kill or server shutdown). > X connection to :0.0 broken (explicit kill or server shutdown). > xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" > X connection to :0.0 broken (explicit kill or server shutdown). > xinit: connection to X server lost. > > waiting for X server to shut down _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86