I have problem.Up install Linux Mandrake 9 am whine start graphic
environment , but monitor with always only off and thereby it end. Up
edits from instruction , what am found on internet me it write always
only :
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??)
unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jul 16 20:36:34
2003
(==) Using config file: "/etc/X11/XF86Config-4"
Parse error on line 2 of section (null) in file /etc/X11/XF86Config-4
"XF86config-4" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
As far as would was possible me the set execute and send on enamel. I
have graphic cards ATI Radeon 7500 with 64 MB DDR memoirs, monitor
ADI E750, Linux version 9 distribution Mandrake. Under the same cover
you sending files: XF86CONFIG-4, XF86CONFIG, XftConfig. In advance I
am much obliged and I'm looking forward to answer
______________________________________________________________________
Reklama:
POZOR! Nova SkodaFabia RS - Adrenalin & Diesel
http://ad2.seznam.cz/redir.cgi?instance=56529%26url=http://www.adrenalindiesel.cz# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Keyboard"
Protocol "Standard"
XkbModel "pc105"
XkbLayout "us_intl"
XkbOptions ""
EndSection
Section "Pointer"
Protocol "IMPS/2"
Device "/dev/psaux"
ZAxisMapping 4 5
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
HorizSync 30-97
VertRefresh 50-160
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
ModeLine "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
ModeLine "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
ModeLine "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480 @ 85 Hz, 43.27 kHz hsync
ModeLine "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
# 800x600 @ 72 Hz, 48.0 kHz hsync
ModeLine "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
ModeLine "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 640x480 @ 100 Hz, 53.01 kHz hsync
ModeLine "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
ModeLine "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
ModeLine "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
ModeLine "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
# 800x600 @ 100 Hz, 64.02 kHz hsync
ModeLine "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
ModeLine "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
ModeLine "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
ModeLine "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1400x1050 @ 60 Hz, 65.5 kHz
ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync
# 1024x768 @ 85 Hz, 70.24 kHz hsync
ModeLine "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
ModeLine "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
ModeLine "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
ModeLine "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x1024 @ 75 Hz, 79.98 kHz hsync
ModeLine "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
ModeLine "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1400x1050 @ 75 Hz, 82.2 kHz hsync
ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
ModeLine "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
ModeLine "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
ModeLine "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1600x1200 @ 85 Hz, 106.3 kHz hsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
ModeLine "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1920x1440 @ 60 Hz, 90.0 kHz hsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync
# 1920x1440 @ 75 Hz, 112.5kHz hsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync
# 512x384 @ 78 Hz, 31.50 kHz hsync
ModeLine "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
ModeLine "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
ModeLine "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
ModeLine "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
ModeLine "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
ModeLine "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
ModeLine "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
ModeLine "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
ModeLine "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
ModeLine "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
Section "Device"
Identifier "ATI Graphics Adapter connector 1"
Driver "Radeon"
BusID "Pci:1:0:0"
Screen1
#Option "xaa_benchmark"
#Option "fifo_moderate"
#Option "pci_burst_on"
#Option "pci_retry"
EndSection
Section "Screen1"
Driver "radeon"
Device "ATI Graphics Adapter connector 1"
Monitor "monitor1"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
viewport 0 0
virtual 1280 1024
EndSubSection
EndSection
#####################################################################
XF86config-4 File
#####################################################################
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for
#xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this
#file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the
#"Software"),
# to deal in the Software without restriction, including without
#limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included
#in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
#OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
#OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project
#shall
# not be used in advertising or otherwise to promote the sale, use or
#other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or
#other
# programs take long to start up, try moving the Type1 and Speedo
#directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 30 - 65
VertRefresh 50 - 120
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
HorizSync 30 - 96
VertRefresh 48 - 120
Option "DPMS"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
#EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter connector 0"
#Driver "fglrx"
Driver "radeon"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "30 - 65"
Option "VRefresh2" "50 - 120"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=496e
Screen 0
EndSection
Section "Device"
Identifier "ATI Graphics Adapter connector 1"
#Driver "fglrx"
Driver "Radeon"
#BusID "PCI:1:0:1" vendor=1002, device=496e
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter connector 0"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI Graphics Adapter connector 1"
Monitor "Monitor1"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
option "Xinerama" "on"
EndSection
### EOF ###
#
# XftConfig
#
# Use with Type1 and TrueType fonts
#
# Note that each application scans all these directories
# during startup, so you may want to disable some to
# get better speed.
# Standard XFree86 Type 1 fonts
dir "/usr/X11R6/lib/X11/fonts/Type1"
# TTF fonts
dir "/usr/X11R6/lib/X11/fonts/TrueType"
dir "/usr/X11R6/lib/X11/fonts/TTF"
# User installed fonts
dir "/usr/X11R6/lib/X11/fonts/drakfont"
dir "/usr/X11R6/lib/X11/fonts/drakfont/ttf"
dir "/usr/X11R6/lib/X11/fonts/drakfont/Type1"
dir "/opt/ttfonts"
# URW fonts
dir "/usr/share/fonts/default/Type1"
# ghostscript fonts
dir "/usr/share/fonts/default/ghostscript"
# default OpenType fonts from mdk, they may be low quality (hey, I'm not
# an artist, but you are welcome to improve them); but they should provide
# a good default to cover a maximum of unicode character positions
# so that text is always readable -- pablo
dir "/usr/share/fonts/otf/mdk"
# yudit font directory
dir "/usr/share/yudit/fonts"
# Localized Truetype fonts
dir "/usr/share/fonts/ttf/western"
dir "/usr/share/fonts/ttf/big5"
dir "/usr/share/fonts/ttf/gb2312"
dir "/usr/share/fonts/ttf/japanese"
dir "/usr/share/fonts/ttf/korean"
dir "/usr/share/fonts/ttf/armenian"
dir "/usr/share/fonts/ttf/decoratives"
dir "/usr/share/fonts/ttf/thai"
dir "/usr/share/fonts/ttf/tamil"
dir "/usr/share/fonts/ttf/tscii"
# don't yet exist, but i hope to include some day a package for them (Pablo)
dir "/usr/share/fonts/ttf/cyrillic"
dir "/usr/share/fonts/ttf/viet"
dir "/usr/share/fonts/ttf/ethiopic"
dir "/usr/share/fonts/ttf/georgian"
dir "/usr/share/fonts/ttf/arabic"
dir "/usr/share/fonts/ttf/hebrew"
dir "/usr/share/fonts/ttf/unicode"
# localized type1
dir "/usr/share/fonts/elmar_scalable"
dir "/usr/share/fonts/type1/baltic/"
dir "/usr/share/fonts/type1/cyrillic/"
dir "/usr/share/fonts/type1/greek"
# Sun JDK fonts
dir "/usr/java/jdk1.3/jre/lib/fonts"
dir "/usr/java/j2re1.4.0/lib/fonts"
# Sun OpenOffice, location depends on install
dir "/usr/openoffice60/share/fonts/type1"
dir "/usr/local/openoffice60/share/fonts/type1"
dir "~/openoffice60/share/fonts/type1"
# OpenOffice fonts from ttfonts*rpm
dir "/usr/share/fonts/default/TrueType"
# AbiSuite comes with URW fonts as well
dir "/usr/share/abisuite/AbiSuite/fonts"
#########################
# the aliases must come before the definitions of the right part,
# eg, a line ... edit family =+ "foo"; must come before the
# definition of "foo"
#########################
#
# alias 'fixed' for 'mono'
#
match any family == "fixed" edit family =+ "mono";
#
# alias 'Monospaced' for 'mono'
#
match any family == "Monospaced" edit family =+ "mono";
#
# Check users config file
#
includeif "~/.xftconfig"
#
# Substitute TrueType fonts for Type1 versions
#
match any family == "Times" edit family =+ "Times New Roman";
match any family == "Helvetica" edit family =+ "Verdana";
match any family == "Courier" edit family =+ "Courier New";
# last ressort defaults
match any family == "Courier" edit family =+ "mono";
match any family == "Helvetica" edit family =+ "sans";
match any family == "Arial" edit family =+ "sans";
match any family == "Times" edit family =+ "serif";
#
# Use TrueType fonts for defaults
#
match any family == "serif" edit family += "Times New Roman";
match any family == "sans" edit family += "Arial";
match any family == "sans" edit family += "Verdana";
#
# Use monotype.com (andale) face where possible
#
match
any family == "mono"
all slant == roman
all weight < bold
edit
family += "monotype.com";
# a nice monospaced one
match any family == "mono" edit family =+ "Lucida Console";
#
# otherwise, use courier
#
match any family == "mono" edit family =+ "Courier New";
match any family == "mono" edit family =+ "Lucidux Mono";
match any family == "mono" edit family =+ "Luxi Mono";
match any family == "mono" edit family =+ "Courier";
#
# Alias between XLFD families and font file family name, prefer local fonts
#
match any family == "Charter" edit family += "Bitstream Charter";
match any family == "Bitstream Charter" edit family =+ "Charter";
match any family == "Lucidux Serif" edit family += "LuciduxSerif";
match any family == "LuciduxSerif" edit family =+ "Lucidux Serif";
match any family == "LuciduxSerif" edit family =+ "Luxi Serif";
match any family == "Lucidux Sans" edit family += "LuciduxSans";
match any family == "LuciduxSans" edit family =+ "Lucidux Sans";
match any family == "LuciduxSans" edit family =+ "Luxi Sans";
match any family == "Lucidux Mono" edit family += "LuciduxMono";
match any family == "LuciduxMono" edit family =+ "Lucidux Mono";
match any family == "LuciduxMono" edit family =+ "Luxi Mono";
#
# TrueType font aliases
#
match any family == "Comic Sans" edit family += "Comic Sans MS";
match any family == "Comic Sans MS" edit family =+ "Comic Sans";
match any family == "Trebuchet" edit family += "Trebuchet MS";
match any family == "Trebuchet MS" edit family =+ "Trebuchet";
match any family == "Monotype" edit family =+ "Monotype.com";
match any family == "Andale Mono" edit family += "Monotype.com";
match any family == "Monotype.com" edit family =+ "Andale Mono";
# modifications from Laurent Culioli
match
any family == "webdings"
edit antialias = false;
encoding += "glyphs-fontspecific";
match
any family == "wingdings"
edit antialias = false;
encoding += "glyphs-fontspecific";
# extra aliases -- pablo
# a nice default for sans serif (same as used in yudit)
match any family == "sans" edit family =+ "Arial";
match any family == "sans" edit family =+ "Helvetica";
match any family == "sans" edit family =+ "Lucidux Sans";
match any family == "sans" edit family =+ "Luxi Sans";
match any family == "sans" edit family =+ "Arija";
# those fonts we don't provide; but it is nice to use them if present
match any family == "sans" edit family =+ "Lucida Sans Unicode";
match any family == "sans" edit family =+ "Tahoma";
#from yudit
match any family == "sans" edit family =+ "Yudit Unicode";
# serif
match any family == "serif" edit family =+ "Times";
match any family == "serif" edit family =+ "Lucidux Serif";
match any family == "serif" edit family =+ "Luxi Serif";
match any family == "serif" edit family =+ "Tomas";
# mono
match any family == "mono" edit family =+ "Courier";
match any family == "mono" edit family =+ "Lucidux Mono";
match any family == "mono" edit family =+ "Luxi Mono";
match any family == "mono" edit family =+ "Kurjeris";
##########
# Cyrillic
##########
match any family == "sans" edit family =+ "Teams";
##########
# Greek
##########
match any family == "sans" edit family =+ "Kerkis";
##########
# armenian
##########
match any family == "Helvetica" edit family =+ "ArmNet Helvetica";
match any family == "sans" edit family =+ "ArmNet Helvetica";
match any family == "sans" edit family =+ "Artsounk";
match any family == "serif" edit family =+ "ArmNet Helvetica";
match any family == "serif" edit family =+ "Artsounk";
##########
# georgian
##########
match any family == "sans" edit family =+ "BPG UTF8 M";
match any family == "serif" edit family =+ "BPG UTF8 M";
######
# thai
######
match any family == "sans" edit family =+ "Norasi";
match any family == "serif" edit family =+ "Phaisarn";
match any family == "serif" edit family =+ "Phaisarn98";
match any family == "serif" edit family =+ "Norasi";
match any family == "mono" edit family =+ "Courier MonoThai";
########
# Hebrew
########
# not sans
match any family == "sans" edit family =+ "Nachlieli";
match any family == "serif" edit family =+ "Times-Hebrew";
match any family == "serif" edit family =+ "Dror";
match any family == "mono" edit family =+ "Courier-Hebrew";
match any family == "mono" edit family =+ "Hasida";
######
# lao
######
match any family == "sans" edit family =+ "Saysettha Unicode";
match any family == "sans" edit family =+ "JG Lao Old Arial";
match any family == "serif" edit family =+ "JG LaoTimes";
match any family == "serif" edit family =+ "Saysettha Unicode";
##########
# ethiopic
##########
match any family == "sans" edit family =+ "GF Zemen Unicode";
match any family == "serif" edit family =+ "GF Zemen Unicode";
match any family == "mono" edit family =+ "GF Zemen Unicode";
#######
# inuit
#######
match any family == "sans" edit family =+ "Pigiarniq";
match any family == "serif" edit family =+ "Pigiarniq";
########
# arabic (extra letters)
########
match any family == "sans" edit family =+ "Urdu Naqsh Nastalique";
match any family == "serif" edit family =+ "Urdu Naqsh Nastalique";
#######
# indic - devanagari
#######
match any family == "Raghindi" edit family =+ "Raghu";
match any family == "sans" edit family =+ "Raghindi";
match any family == "serif" edit family =+ "Raghindi";
#######
# indic - malayalam
#######
match any family == "sans" edit family =+ "malayalam";
match any family == "serif" edit family =+ "malayalam";
########
# korean
########
match any family == "Gulim" edit family =+ "Baekmuk unigulir";
match any family == "Gulim" edit family =+ "Baekmuk Gulim";
match any family == "Batang" edit family =+ "Ubatang";
match any family == "Batang" edit family =+ "Baekmuk Batang";
match any family == "Dotum" edit family =+ "Baekmuk Dotum";
match any family == "sans" edit family =+ "Baekmuk Gulim";
match any family == "serif" edit family =+ "Baekmuk Batang";
match any family == "mono" edit family =+ "Baekmuk Gulim";
##########
# japanese
##########
match any family == "Mincho" edit family =+ "MS Mincho";
match any family == "Gothic" edit family =+ "MS Gothic";
match any family == "sans" edit family =+ "MS Mincho";
match any family == "serif" edit family =+ "MS Mincho";
match any family == "mono" edit family =+ "MS Gothic";
################
# chinese gb2312
################
match any family == "Kaiti" edit family =+ "AR PL KaitiM GB";
match any family == "Sungti" edit family =+ "AR PL SungtiL GB";
match any family == "sans" edit family =+ "AR PL SungtiL GB";
match any family == "serif" edit family =+ "MS Song";
match any family == "serif" edit family =+ "AR PL SungtiL GB";
match any family == "mono" edit family =+ "AR PL SungtiL GB";
##############
# chinese big5
##############
match any family == "Kaiti" edit family =+ "AR PL KaitiM Big5";
match any family == "Mingti" edit family =+ "AR PL Mingti2L Big5";
match any family == "sans" edit family =+ "AR PL Mingti2L Big5";
match any family == "serif" edit family =+ "AR PL Mingti2L Big5";
match any family == "mono" edit family =+ "AR PL Mingti2L Big5";
#######
# indic - tamil
#######
match any family == "sans" edit family =+ "TSC_Avarangal";
match any family == "serif" edit family =+ "TSC_Avarangal";
match any family == "mono" edit family =+ "TSC_AvarangalFxd";
# ???
match any family == "sans" edit family =+ "Ballymun RO";
##########
# japanese again (keep it last as the font wrongly claims to cover all unicode)
##########
match any family == "Mincho" edit family =+ "Kochi Mincho";
match any family == "Gothic" edit family =+ "Kochi Gothic";
match any family == "sans" edit family =+ "Kochi Mincho";
match any family == "serif" edit family =+ "Kochi Mincho";
match any family == "mono" edit family =+ "Kochi Gothic";
#
# If the Microsoft Web Fonts are not installed, we have to find a
# replacement
#
# these come with Sun JDK 1.3
match any family == "Verdana" edit family =+ "Lucida Sans";
match any family == "Times New Roman" edit family =+ "Lucida Bright";
match any family == "Courier New" edit family =+ "Lucida Sans Typewriter";
# OpenOffice 6
match any family == "Verdana" edit family =+ "Lucida Sans Tur";
match any family == "Times New Roman" edit family =+ "Lucida Bright Tur";
match any family == "Courier New" edit family =+ "Lucida Sans Typewriter Tur";
# ttfonts from RH7
match any family == "Verdana" edit family =+ "Helmet";
# URW fonts
match any family == "Verdana" edit family =+ "Nimbus Sans L";
match any family == "Times New Roman" edit family =+ "Nimbus Roman No9 L";
match any family == "Courier New" edit family =+ "Nimbus Mono L";
# western fonts
match any family == "Verdana" edit family =+ "Blue Highway";
# XFree86 default fonts
match any family == "Verdana" edit family =+ "LuciduxSans";
match any family == "Verdana" edit family =+ "Luxi Sans";
match any family == "Times New Roman" edit family =+ "LuciduxSerif";
match any family == "Times New Roman" edit family =+ "Luxi Serif";
# very last ressort
match any family == "serif" edit family =+ "Code2000";
match any family == "serif" edit family =+ "fixed";
match any family == "serif" edit family =+ "sans";
match any family == "serif" edit family =+ "mdk_teams";
match any family == "sans" edit family =+ "Code2000";
match any family == "sans" edit family =+ "mdk_teams";
match any family == "mono" edit family =+ "Code2000";
match any family == "mono" edit family =+ "mdk_teams";
match any family == "mono" edit family =+ "serif";
# Aditions from Danny Tholen
match
any family == "symbol"
edit
antialias = false;
encoding += "glyphs-fontspecific";
match
any family == "Standard Symbols L"
edit
antialias = false;
encoding += "glyphs-fontspecific";
match
any family == "dingbats"
edit
antialias = false;
encoding += "glyphs-fontspecific";
match
any family == "Cursor"
edit
antialias = false;
encoding += "glyphs-fontspecific";
match
any family == "StarBats"
edit
antialias = false;
encoding += "glyphs-fontspecific";
match
any family == "StarMath"
edit
antialias = false;
encoding += "glyphs-fontspecific";
