I recently purchased an ATi 9800XT and I am having
trouble starting X with the new driver from ATi.
I am running Mandrake Linux 9.1 and XFree86 4.3.0. I
downloaded the fglrx-glc22-4.3.0-3.6.0.i386 driver
from ATi and followed all of the steps for
installation, including using the fglrxconfig and
running make.sh and make_install.sh. When I run startx
I get the background for about 3 seconds then get
dropped back to the command line with the message. . .
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-0.13mdksmp i686
[ELF]
Build Date: 12 March 2003
Before reporting problems, check
http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II)
informational,
(WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Dec
31 11:36:13 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Using vt 7
(WW) fglrx: No matching Device section for instance
(BusID PCI:1:0:1) found
I have seen a lot of information about this problem
but no useful solution. I am a complete newb and I
fear that I'm missing something obvious. I'd
appreciate any help.
Thanks.
Below are my log and config files.
********************************************
XFree86.0.log
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-0.13mdksmp i686
[ELF]
Build Date: 12 March 2003
Before reporting problems, check
http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II)
informational,
(WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Dec
31 11:36:13 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000,
mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev
00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev
00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1102,0004 card 1102,0051 rev
03 class 04,01,00 hdr 80
(II) PCI: 00:09:1: chip 1102,7003 card 1102,0040 rev
03 class 09,80,00 hdr 80
(II) PCI: 00:09:2: chip 1102,4001 card 1102,0010 rev
00 class 0c,00,10 hdr 80
(II) PCI: 00:0d:0: chip 10ec,8139 card 10ec,8139 rev
10 class 02,00,00 hdr 00
(II) PCI: 00:0e:0: chip 1106,3038 card 0925,1234 rev
50 class 0c,03,00 hdr 80
(II) PCI: 00:0e:1: chip 1106,3038 card 0925,1234 rev
50 class 0c,03,00 hdr 80
(II) PCI: 00:0e:2: chip 1106,3104 card 0925,1234 rev
51 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3147 card 1106,3147 rev
00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev
06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev
23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev
23 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e4a card 1002,0002 rev
00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e6a card 1002,0003 rev
00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL:
0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL:
0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL:
0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset
(0x4e4a) rev 0, Mem @ 0xd0000000/27, 0xe5000000/16,
I/O @ 0xa000/8
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset
(0x4e6a) rev 0, Mem @ 0xd8000000/27, 0xe5010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000
from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[1] -1 0 0xe7004000 - 0xe70040ff (0x100) MX[B]
[2] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
[3] -1 0 0xe7006000 - 0xe70067ff (0x800) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[10] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[11] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[13] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[14] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[15] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[1] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing
overlaps:
[0] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[1] -1 0 0xe7004000 - 0xe70040ff (0x100) MX[B]
[2] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
[3] -1 0 0xe7006000 - 0xe70067ff (0x800) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[10] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[11] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[13] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[14] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[15] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing
overlaps:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[1] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing
overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[6] -1 0 0xe7004000 - 0xe70040ff (0x100) MX[B]
[7] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
[8] -1 0 0xe7006000 - 0xe70067ff (0x800) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000)
MX[B](B)
[12] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000)
MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[19] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[20] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[23] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading
/usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading
/usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading
/usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading
/usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading
/usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading
/usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading
/usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research
GmbH, Germany"
compiled for 4.3.0.1, module version = 3.7.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id
(R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250
Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf
(M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200
QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT
(R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350
AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE
(R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500
PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL
unknown),
ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI
R350 NJ (R9800),
ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance
(BusID PCI:1:0:1) found
(--) Chipset ATI R350 NJ (R9800) found
(II) resource ranges after xf86ClaimFixedResources()
call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[6] -1 0 0xe7004000 - 0xe70040ff (0x100) MX[B]
[7] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
[8] -1 0 0xe7006000 - 0xe70067ff (0x800) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000)
MX[B](B)
[12] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000)
MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[19] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[20] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[23] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x82032a8
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[6] -1 0 0xe7004000 - 0xe70040ff (0x100) MX[B]
[7] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
[8] -1 0 0xe7006000 - 0xe70067ff (0x800) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000)
MX[B](B)
[12] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[13] -1 0 0xd8000000 - 0xdfffffff (0x8000000)
MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[22] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[23] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes
(32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "ATI R350 NJ (R9800)" (Chipset
= 0x4e4a)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice =
0x0002)
(--) fglrx(0): board vendor info: original ATI grafics
adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe5000000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x02
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR
SDRAM)
(II) fglrx(0): board/chipset is supported by this
driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0,
TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1,
TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at
address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at
address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at
address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor
Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at
address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at
address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at
address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor
Type 1
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary
head ---------------------------
(II) fglrx(0): Manufacturer: VSC Model: e809
Serial#: 16843009
(II) fglrx(0): Year: 2003 Week: 38
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage
Level: 0.700/0.300 V
(II) fglrx(0): Signal levels configurable
(II) fglrx(0): Sync: Separate CompositeSerration on.
V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40
vert.: 30
(II) fglrx(0): Gamma: 2.92
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off;
RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.628 redY: 0.328 greenX: 0.280
greenY: 0.598
(II) fglrx(0): blueX: 0.146 blueY: 0.060 whiteX:
0.283 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED] (interlaced)
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): [EMAIL PROTECTED]
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh:
75 vid: 20393
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh:
85 vid: 39297
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85
vid: 22881
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75
vid: 20337
(II) fglrx(0): #4: hsize: 1792 vsize 1344 refresh:
75 vid: 20417
(II) fglrx(0): #5: hsize: 1856 vsize 1392 refresh:
60 vid: 16585
(II) fglrx(0): #6: hsize: 1920 vsize 1440 refresh:
60 vid: 16593
(II) fglrx(0): #7: hsize: 2048 vsize 1536 refresh:
60 vid: 16609
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 229.5 MHz Image Size: 390 x
290 mm
(II) fglrx(0): h_active: 1600 h_sync: 1664
h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1201
v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: 42K033800295
(II) fglrx(0): Ranges: V min: 50 V max: 180 Hz, H
min: 30 H max: 110 kHz, PixClock max 260 MHz
(II) fglrx(0): Monitor name: G220fb
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000
max=40000; xclk=36500
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 7 valid mode(s) found.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Default mode "1600x1200": 229.5 MHz
(scaled from 0.0 MHz), 106.2 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1600x1200" 229.50 1600 1664
1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Default mode "1280x1024": 157.5 MHz
(scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344
1504 1728 1024 1025 1028 1072 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz
(scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz
(scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072
1168 1376 768 769 772 808 +hsync +vsync
(**) fglrx(0): Default mode "832x624": 57.3 MHz
(scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624" 57.28 832 864 928
1152 624 625 628 667 -hsync -vsync
(**) fglrx(0): *Default mode "800x600": 50.0 MHz
(scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976
1040 600 637 643 666 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz
(scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720
840 480 481 484 500 -hsync -vsync
(--) fglrx(0): Display dimensions: (400, 300) mm
(--) fglrx(0): DPI set to (101, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading
/usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research
GmbH, Germany"
compiled for 4.3.0.1, module version = 3.7.0
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x000006c5
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): using CAIL version [ATI
LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[8] -1 0 0xe7004000 - 0xe70040ff (0x100) MX[B]
[9] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
[10] -1 0 0xe7006000 - 0xe70067ff (0x800) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000)
MX[B](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000)
MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[25] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[26] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) fglrx(0): Cannot read colourmap from VGA. Will
restore with default
(II) fglrx(0): UMM area: 0xd0953000
(size=0x076ad000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] created "fglrx" driver at busid
"PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at
0xf09c8000
(II) fglrx(0): [drm] mapped SAREA 0xf09c8000 to
0x40014000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for
kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 3.7.0
(II) fglrx(0): Date: Dec 18 2003
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE:
2.4.21-0.13mdk
(II) fglrx(0): Build-Kernel MODVERSIONS:
yes
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE:
0x1000
(II) fglrx(0): [drm] register handle = 0xe5000000
(II) fglrx(0): [agp] Mode=0x1f000207 bridge:
0x1106/0x3099
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000304
(II) fglrx(0): [agp] AGP protocoll is enabled for
grafics board. (cmd=0x1f000304)
(II) fglrx(0): [agp] grafics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000
bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs =
100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle =
0xf8af8000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize:
0x00953000
(II) fglrx(0): FBMM initialized for area
(0,0)-(1600,1527)
(II) fglrx(0): FBMM auto alloc for area
(0,0)-(1600,1200) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1200)
(II) fglrx(0): Largest offscreen area available: 1600
x 319
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture
(XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1"
(type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) fglrx(0): [drm] removed 1 reserved context for
kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA
0xf09c8000 at 0x40014000
*****************************************************
XF86Config-4
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a
substitute for xf86config.
# Note by ATI: the below copyright notice is there for
servicing possibly
# pending third party rights on the file format and
the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any
person obtaining a
# copy of this software and associated documentation
files (the "Software"),
# to deal in the Software without restriction,
including without limitation
# the rights to use, copy, modify, merge, publish,
distribute, sublicense,
# and/or sell copies of the Software, and to permit
persons to whom the
# Software is furnished to do so, subject to the
following conditions:
#
# The above copyright notice and this permission
notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the
XFree86 Project shall
# not be used in advertising or otherwise to promote
the sale, use or other
# dealings in this Software without prior written
authorization from the
# XFree86 Project.
#
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details
about the format of
# this file.
#
**********************************************************************
#
**********************************************************************
# DRI Section
#
**********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific
user group:
# Group 100 # users
# Mode 0660
EndSection
#
**********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and
disables
# initialisation of the XFree86-DGA extension within
that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't
initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb
paths to be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the
name of the
# file minus the extension (like ".txt" or ".db").
There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are
concatenated together),
# as well as specifying multiple comma-separated
entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and
emacs, Mosaic or other
# programs take long to start up, try moving the Type1
and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown
here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot
where a signal is
# received. This may leave the console in an unusable
state, but may
# provide a better stack trace in the core dump to aid
in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server
abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the
<Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key
events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune
client. With
# it the client can still run and fetch card and
monitor attributes,
# but it will not be allowed to change them. If it
tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local
xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the
input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local
client to
# change the keyboard or mouse settings (currently
only xset).
# Option "AllowNonLocalModInDev"
EndSection
#
**********************************************************************
# Input devices
#
**********************************************************************
#
**********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it
defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not
Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled
(eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard,
modify the
# lines below (which are the defaults). For example,
for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can
use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout
setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your
capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
#
**********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines,
and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech
mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft
mice
# Emulate3Timeout is the timeout in milliseconds
(default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech
mice
# Option "ChordMiddle"
EndSection
#
**********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for
example only. Refer
# to the XF86Config man page for a description of the
options.
#
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-110
VertRefresh 50 - 180
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "[EMAIL PROTECTED]" 43.163 640 680 744 848 480
481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "[EMAIL PROTECTED]" 68.179 800 848 936 1072 600
601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "[EMAIL PROTECTED]" 113.309 1024 1096 1208 1392
768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "[EMAIL PROTECTED]" 81.642 1152 1216 1336 1520
864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "[EMAIL PROTECTED]" 119.651 1152 1224 1352 1552
864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "[EMAIL PROTECTED]" 143.472 1152 1232 1360 1568
864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "[EMAIL PROTECTED]" 129.859 1280 1368 1504 1728
960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "[EMAIL PROTECTED]" 178.992 1280 1376 1520 1760
960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "[EMAIL PROTECTED]" 190.960 1280 1376 1520 1760
1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @
V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720
1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144
1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160
1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176
1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192
1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144
1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176
1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096
1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176
1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576
1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608
1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592
1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624
1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800
1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800
1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880
1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and
compatible display devices
# Modeline "[EMAIL PROTECTED]" 124.620 1920 1928 1980 2048
2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and
compatible display devices
# Modeline "[EMAIL PROTECTED]" 149.250 1920 1928 1982 2044
2400 2402 2404 2434 +hsync +vsync
EndSection
#
**********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be
present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can
be used to override
# the driver's chipset detection, and should not
normally be specified.
# Chipset "generic"
# The Driver line must be present. When using
run-time loadable driver
# modules, this line instructs the server to load the
specified driver
# module. Even when not using loadable driver
modules, this line
# indicates which driver should interpret the
information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly
multiple devices
# this section is intended for. When this line isn't
present, a device
# section can only match up with the primary video
device. For PCI
# devices a line like the following could be used.
This line should not
# normally be included unless there is more than one
video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics
Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" #
disable DRI mtrr mapper, driver has its own code for
mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e4a
Screen 0
EndSection
#
**********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each
describes
# the configuration of a single screen. A single
specific screen section
# may be specified from the X server command line with
the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768"
"800x600"
ViewPort 0 0 # initial origin if mode is
smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present.
Each describes
# the way multiple screens are organised. A specific
ServerLayout
# section may be specified from the X server command
line with the
# "-layout" option. In the absence of this, the first
section is used.
# When now ServerLayout section is present, the first
Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name,
and optionally
# the relative position of other screens. The four
names after
# primary screen name are the screens to the top,
bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice
section name and
# optionally some options to specify the way the
device is to be
# used. Those options include "CorePointer",
"CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
__________________________________
Do you Yahoo!?
Find out what made the Top Yahoo! Searches of 2003
http://search.yahoo.com/top2003
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
