On Tue, Dec 9, 2008 at 7:39 AM, Joseph Adams <[EMAIL PROTECTED]> wrote: > I wrote a little script and got the Xorg.0.log of every combination. > In some of the tests, I heard Fedora 10 GNOME's startup sound, and > other times I didn't. IIRC the snippet posted farther down is from a > test where I heard the startup sound. I also got my dmesg (after > rebooting) which may contain some useful information: > > http://www.funsitelots.com/pub/emac_connectortabletests.tar.bz2 > http://www.funsitelots.com/pub/emac_dmesg
Logs look good. We'll have to do more testing when you get an external monitor in order to determine the ddc line used for the external port. For now it looks like the monitor doesn't like the default mode the xserver is choosing: (II) RADEON(0): Printing probed modes for output VGA-1 (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 (II) RADEON(0): EDID for output VGA-0 (II) RADEON(0): Output VGA-1 connected (II) RADEON(0): Output VGA-0 disconnected (II) RADEON(0): Using user preference for initial modes (II) RADEON(0): Output VGA-1 using initial mode 1280x960 Does it work if you switch to a different mode with xrandr, e.g., xrandr --output VGA-1 --mode 1024x768 or adding your mode: xrandr --newmode "1024x768j" 99.198 1024 1072 1168 1376 768 769 772 810 +HSync +VSync xrandr --addmode VGA-1 1024x768j xrandr --output VGA-1 --mode 1024x768j When we find a mode you want to use you can make it your preferred mode in your xorg.conf. Make sure to set your monitor Identifier to "VGA-1" or associate it with whatever your monitor section is called Option "Monitor-VGA-1" "my monitor name". see this page for more info on xrandr config: http://wiki.debian.org/XStrikeForce/HowToRandR12 Make sure you test with one of the ConnectorTable options I suggested. Alex _______________________________________________ xorg mailing list xorg@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/xorg