Hello all, I am trying to setup xorg.conf for 2 monitors 1. Labtop monitors (LVDS1) 2. External monitors (HDMI1)
so i need the External monitors to be the man screen and Labtop monitors to be the External for it. However, all i got so far is a duble of one screen display on both screens. so if i open something it will be display on both screen. $ xrandr Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 214mm 1600x900 60.3*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 520mm x 324mm 1920x1080 60.0*+ 1280x1024 60.0 1360x768 59.8 1280x720 59.7 1024x768 60.0 800x600 60.3 720x480 59.9 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 04:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Extensions" Option "Composite" "Enable" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/OTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/75dpi/" EndSection Section "Module" Load "dri2" Load "record" Load "extmod" Load "dri" Load "dbe" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Device" #Option "Monitor-LVDS1" "Monitor0" #Option "Monitor-HDMI1" "Monitor1" Identifier "IntelDevice" Driver "intel" VendorName "Intel Corporation" BoardName "Core Processor Integrated Graphics Controller" BusID "PCI:0:2:0" Option "Monitor-LVDS1" "LVDS" Option "Monitor-HDMI1" "HDMI" EndSection Section "Monitor" Identifier "LVDS" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "HDMI" VendorName "LG" ModelName "FULLHD" EndSection Section "Screen" Identifier "Screen0" Device "IntelDevice" Monitor "LVDS" SubSection "Display" #Viewport 0 0 Depth 24 Modes "1600x900" Virtual 3520 0 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "IntelDevice" Monitor "HDMI" SubSection "Display" #Viewport 0 0 Depth 24 Modes "1920x1080" Virtual 3520 0 EndSubSection EndSection any help would be much appreciated. _______________________________________________ xorg@lists.freedesktop.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com