Julian, Sorry on the name mix-up, typing quickly.
-morgan > On Sep 15, 2017, at 12:56 PM, Morgan Jones <mor...@morganjones.org> wrote: > > Hello Julia, > > I’m troubleshooting this exact behavior. So far I’ve found if you create an > /etc/dirsrv/admin-serv/adm.conf before the silent install it works. However > we just went through a host domain name change (long story) and I’m having I > think unrelated problems. I hope to resolve that shortly and then I might > have a more definitive answer. > > In the mean time this may be helpful to you: > https://github.com/morganllj/ansible-playbooks/blob/develop/templates/389_primary_master_setup.inf.j2 > https://github.com/morganllj/ansible-playbooks/blob/develop/templates/adm.conf.j2 > > Here’s where they’re used if you are familiar with ansible: > https://github.com/morganllj/ansible-playbooks/blob/develop/install_389.yml > > -morgan > > >> On Sep 15, 2017, at 11:49 AM, Julian Kippels <kipp...@hhu.de> wrote: >> >> Hi, >> >> I was playing around with silent installs and found out that the final >> configuration differs from interactive installations. Here is what I >> did: >> >> I installed two servers on different machines ds-1.localdomain and >> ds-2.localdomain. ds-1 is used as a master and ds-2 is supposed to use >> it as its configuration server. >> Both machines run RHEL 7.4 with the latest EPEL-builds of 389-ds. >> >> First I used setup-ds-admin.pl --keepcache interactively first on ds-1 >> and told it not to use an existing configuration server, then on ds-2 >> and told it to use ds-1. When I connect to ds-1 using 389-console I can >> see both ds-1 and ds-2. >> Then I took the generated .inf-files, removed all traces from the >> previous instances from both machines using remove-ds-admin.pl -a -f -y >> and then ran setup-ds-admin.pl --silent --file=ds-1.inf and >> --file=ds-2.inf respectively. When I connect to ds-1 now, I only see >> ds-1, to see ds-2 I have to connect to ds-2 with 389-console. >> >> The .inf-files look like this: >> -------- >> $ cat ds-1.inf >> [General] >> AdminDomain = localdomain >> ConfigDirectoryAdminID = admin >> ConfigDirectoryAdminPwd = XXX >> ConfigDirectoryLdapURL = ldap://ds-1.localdomain:389/o=NetscapeRoot >> FullMachineName = ds-1.localdomain >> ServerRoot = /usr/lib64/dirsrv >> StrictHostCheck = true >> SuiteSpotGroup = dirsrv >> SuiteSpotUserID = dirsrv >> [admin] >> Port = 9830 >> ServerAdminID = admin >> ServerAdminPwd = XXX >> ServerIpAddress = 0.0.0.0 >> SysUser = dirsrv >> [slapd] >> start_server = 0 >> AddOrgEntries = Yes >> AddSampleEntries = No >> HashedRootDNPwd = XXX >> InstScriptsEnabled = true >> InstallLdifFile = suggest >> RootDN = cn=Directory Manager >> RootDNPwd = XXX >> ServerIdentifier = ds-1 >> ServerPort = 389 >> SlapdConfigForMC = yes >> Suffix = dc=localdomain >> UseExistingMC = 0 >> bak_dir = /var/lib/dirsrv/slapd-ds-1/bak >> bindir = /usr/bin >> cert_dir = /etc/dirsrv/slapd-ds-1 >> config_dir = /etc/dirsrv/slapd-ds-1 >> datadir = /usr/share >> db_dir = /var/lib/dirsrv/slapd-ds-1/db >> ds_bename = userRoot >> inst_dir = /usr/lib64/dirsrv/slapd-ds-1 >> ldif_dir = /var/lib/dirsrv/slapd-ds-1/ldif >> localstatedir = /var >> lock_dir = /var/lock/dirsrv/slapd-ds-1 >> log_dir = /var/log/dirsrv/slapd-ds-1 >> naming_value = rz >> run_dir = /var/run/dirsrv >> sbindir = /usr/sbin >> schema_dir = /etc/dirsrv/slapd-ds-1/schema >> sysconfdir = /etc >> tmp_dir = /tmp >> -------- >> $ cat ds-2.inf >> [General] >> AdminDomain = localdomain >> ConfigDirectoryAdminID = admin >> ConfigDirectoryAdminPwd = XXX >> ConfigDirectoryLdapURL = ldap://ds-1.localdomain:389/o=NetscapeRoot >> FullMachineName = ds-2.localdomain >> ServerRoot = /usr/lib64/dirsrv >> StrictHostCheck = true >> SuiteSpotGroup = dirsrv >> SuiteSpotUserID = dirsrv >> [admin] >> Port = 9830 >> ServerAdminID = admin >> ServerAdminPwd = XXX >> ServerIpAddress = 0.0.0.0 >> SysUser = dirsrv >> [slapd] >> AddOrgEntries = Yes >> AddSampleEntries = No >> HashedRootDNPwd = XXX >> InstScriptsEnabled = true >> InstallLdifFile = suggest >> RootDN = cn=Directory Manager >> RootDNPwd = XXX >> ServerIdentifier = ds-2 >> ServerPort = 389 >> Suffix = dc=localdomain >> UseExistingMC = 1 >> bak_dir = /var/lib/dirsrv/slapd-ds-2/bak >> bindir = /usr/bin >> cert_dir = /etc/dirsrv/slapd-ds-2 >> config_dir = /etc/dirsrv/slapd-ds-2 >> datadir = /usr/share >> db_dir = /var/lib/dirsrv/slapd-ds-2/db >> ds_bename = userRoot >> inst_dir = /usr/lib64/dirsrv/slapd-ds-2 >> ldif_dir = /var/lib/dirsrv/slapd-ds-2/ldif >> localstatedir = /var >> lock_dir = /var/lock/dirsrv/slapd-ds-2 >> log_dir = /var/log/dirsrv/slapd-ds-2 >> naming_value = rz >> run_dir = /var/run/dirsrv >> sbindir = /usr/sbin >> schema_dir = /etc/dirsrv/slapd-ds-2/schema >> sysconfdir = /etc >> tmp_dir = /tmp >> >> I think this unintended behaviour and should be fixed. Unless I did a >> mistake somewhere, but I can't see where… >> >> Julian >> _______________________________________________ >> 389-users mailing list -- 389-users@lists.fedoraproject.org >> To unsubscribe send an email to 389-users-le...@lists.fedoraproject.org > _______________________________________________ > 389-users mailing list -- 389-users@lists.fedoraproject.org > To unsubscribe send an email to 389-users-le...@lists.fedoraproject.org _______________________________________________ 389-users mailing list -- 389-users@lists.fedoraproject.org To unsubscribe send an email to 389-users-le...@lists.fedoraproject.org
