> In the future, the "file" utility is pretty handy:
> file /etc/init.d/rtirq
> /etc/init.d/rtirq: Bourne-Again shell script text executable
Hi Gustin :)
before I wrote my request I tried to run it, but it didn't work :(, but
it might be because I made typos, similar to the one I did some seconds ago:
spinymouse-s...@64studio:~$ /etc/init.d/rtirq ststus
Usage: /etc/init.d/rtirq {[re]start|stop|reset|status}
:D
Maybe the RTPRIO of the USB MIDI DEVICE is bad?
spinymouse-s...@64studio:~$ /etc/init.d/rtirq status
PID CLS RTPRIO NI PRI %CPU STAT COMMAND
411 FF 90 - 130 0.0 S< IRQ-8 RTC
2349 FF 85 - 125 0.0 S< IRQ-21 PCI SOUND CARD
971 FF 80 - 120 0.0 S< IRQ-16
1366 FF 80 - 120 0.0 S< IRQ-19
1370 FF 79 - 119 0.0 S< IRQ-17 USB MIDI DEVICE
1399 FF 78 - 118 0.0 S< IRQ-18
403 FF 75 - 115 0.0 S< IRQ-1
402 FF 74 - 114 0.0 S< IRQ-12
104 FF 50 - 90 0.0 S< IRQ-9
995 FF 50 - 90 0.0 S< IRQ-22
1522 FF 50 - 90 0.0 S< IRQ-14
2075 FF 50 - 90 0.0 S< IRQ-7
2093 FF 50 - 90 0.0 S< IRQ-25
4167 FF 50 - 90 0.0 S< IRQ-4
spinymouse-s...@64studio:~$ hwinfo | grep irq
[snip]
irq:1 0 ( 129) "timer"
irq:0 1 ( 1402) "i8042"
irq:1 4 ( 13) "serial"
irq:1 7 ( 0) "parport0"
irq:0 8 ( 1) "rtc0"
irq:0 9 ( 0) "acpi"
irq:0 12 ( 123906) "i8042"
irq:1 14 ( 23327) "ide0"
irq:0 16 ( 1) "ohci_hcd:usb1"
irq:0 17 ( 30) "ohci_hcd:usb3" "ohci_hcd:usb5"
irq:0 18 ( 2) "ohci_hcd:usb4" "ohci_hcd:usb6"
"rad...@pci:0000:01:05.0"
irq:0 19 ( 2) "ehci_hcd:usb2"
irq:0 21 ( 0) "ICE1712"
irq:0 22 ( 11537) "ahci" "firewire_ohci"
irq:0 25 ( 1733) "eth0"
used irqs: 0,1,4,7,8,9,12,14,16,17,18,19,21,22,24,25
Cheers,
Ralf
_______________________________________________
64studio-devel mailing list
[email protected]
http://lists.64studio.com/mailman/listinfo/64studio-devel
