Hi Ralf, hi all, finally I managed to compile the kernel following your instructions! Thanks a lot for that, everything went fine.
I also found out how to check for your currently installed alsa version: mar...@64studio:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. mar...@64studio:~$ While updating alsa I ran into problems which I describe in another mail to the list. Also the rtirq script does not work, again another mail. Happy new year to everybody, Martin On Wed, Dec 23, 2009 at 12:46 PM, Ralf Mardorf <[email protected]> wrote: > > Martin Horn wrote: >> >> WWOOWW ! Thank you very much, that was a lot of work! > > But I made a mistake, sorry. > >> spinymouse-s...@64studio:~/linux$ make oldconfig >> >> ### >> You can ignore warnings. >> Always just enter when you get asked anything. >> > > spinymouse-s...@64studio:~$ cat /boot/config-2.6.31.6-rt19 | grep FTRACE > [snip] > CONFIG_FTRACE=y > [snip] > > But it should be > # CONFIG_FTRACE is not set > to avoid latencies. > > IIRC from building 2.6.31.5-rt18 you will be asked about FTRACE by oldconfig. If not disable it by running menuconfig or just change it by editing it with gedit, before you compile the kernel. > > Cheers, > Ralf > > -- > Download Internet Explorer 8 and win a > Red Tick Beer > brewed with dogs swimming in the fermenting tank > http://simpsonspedia.net/images/9/91/Red-Tick-Beer-2.jpg >
_______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
