Hi How do I re-install the sound driver when changing the RME card. I have gone back to a 9632 with 3 ADATs
Thing is even when un-installing alsa firmware and re-installing it it still shows the original card. I had a problem with ADAT 1 not locking at all, after much testing and changing light pipes I have to assume that the card must be faulty. So I need to tell the system that the card has changed. Here is some output: ******************************* sudo hdsploader hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards : Card 0 : RME Digi9652 (Rev 1.5) at 0xf9000000, irq 19 ******************************* As you can see it seems to think it's the old card. HDSPconf will not open at all or HDSPmixer. When running in the terminal I get: **************************** Looking for HDSP cards : Card 0 : RME Digi9652 (Rev 1.5) at 0xf9000000, irq 19 No Hammerfall DSP card found. stu...@64studio:~$ **************************** Any ideas how I Load the correct drivers, or must I re-install the OS? Cheers Bob
_______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
