On Tue, 11 Oct 2011 18:00:25 +0100 Daniel James <[email protected]> wrote:
> Hi Larry, > > > The downside is that the 10/10 is powered by a freaking > > wall-wart, and the connection to the PCI card is flakey as well. > > It should be possible to source a better power supply if you know the > specs - John Rigg used to mod 1010's with good results. > > Try an IEEE 1284 parallel port cable from an old Zip drive to replace > the stock breakout cable, it works great (as long as you don't try to > hot plug it - that is likely to cause damage, according to the manual). > Whatever you use I believe it has to be IEEE 1284 compliant; some serial > cables aren't, as I understand it. > > > I _would_ like to install something on my HDMI laptop, > > however, and I currently haven't found yet any answers. > > OpenDAW 4.0 beta1 should work on that, as long as the video card works > on Debian squeeze. You will probably need to install the linux-firmware > package to get direct rendering on Radeon etc. > > Cheers! > > Daniel Where *is* OpenDaw 4.0? Maybe I'm going senile, but I'm finding it extremely difficult to find anything other than the years-old version of 64Studio :( -- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song. _______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
