Hi Diego,
I'm not sure if you got this email. So, I re-send it.
ThanksQin
On Monday, May 1, 2017 5:22 PM, Qin Wang <[email protected]> wrote:
Dear authors,
I read through SF0 (v4). The following is my comments.
2. Introduction ü “The Scheduling Algorithmcollects the cell
allocation/deletionrequests from the neighbors and thenumber of cells which
are currently under usage.” ==> addition/deletion? allocation/deallocation? 4.
SF0 Triggering Eventsü What is “cell allocation/deallocation process with the
neighbor”?The trigger event is not clear. 5. SF0 Cell Estimation Algorithmü
What is incoming cells and outgoing cells? Are they Rx cells and Txcells,
respectively?ü What is “used cells”? Is it same as “scheduled cells”? If not,
howto count used cells. 6. SF0 Allocation Policyü “The number of cells to be
scheduled/deleted”==> “added/deleted”?ü “3. If
SCHEDULEDCELLS<=REQUIREDCELLS,add one or more cells.” ==> “3. If
SCHEDULEDCELLS<REQUIREDCELLS, add oneor more cells.ӟ When and how the initial
value of SCHEDULEDCELLS will be set? Theinitialization should include not only
setting SCHDULEDCELLS equal to SOFTHRESH,but also adding SOFTHRESH cells into
schedule for starting the state machine describedin Fig.1. 7. Rules for
CellListü “verifying that the slot offset and channel offset are not occupied
andchoose channelOffset randomly for each cell” ==> “verifying that the
slotoffset is not occupied and choose channelOffset randomly for each cell” 10.
Node Behavior at Bootü Should the initialization of SCHEDULEDCELLS happen at
boot? If you have any question regarding it, please feel free to contact me.
ThanksQin_______________________________________________
6tisch mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/6tisch
_______________________________________________
6tisch mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/6tisch
_______________________________________________
6tisch mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/6tisch
