Perfect, thanks! On Wed, Jun 21, 2017 at 2:26 PM, Prof. Diego Dujovne < [email protected]> wrote:
> Thomas, > Yes, I got this e-mail (June 9th). > Regards, > > Diego > > > 2017-06-21 8:13 GMT-04:00 Thomas Watteyne <[email protected]>: > >> Diego, >> Can you confirm you got this e-mail? One thing that has worked well in >> the past is to track issue raised in either the IETF issue tracker, or the >> tracker part of the repo of our draft. >> Just wanting to make sure we are not forgetting about comments. >> Thomas >> >> On Fri, Jun 9, 2017 at 5:02 PM, Qin Wang <[email protected]> wrote: >> >>> Hi Diego, >>> >>> I'm not sure if you got this email. So, I re-send it. >>> >>> Thanks >>> Qin >>> >>> >>> On Monday, May 1, 2017 5:22 PM, Qin Wang <[email protected]> wrote: >>> >>> >>> Dear authors, >>> >>> I read through SF0 (v4). The following is my comments. >>> >>> 2. Introduction >>> ü “The Scheduling Algorithm collects the cell *allocation/deletion* >>> requests from the neighbors and the number of cells which are currently >>> under usage.” ==> addition/deletion? allocation/deallocation? >>> >>> 4. SF0 Triggering Events >>> ü What is “cell allocation/deallocation process with the neighbor”? >>> The trigger event is not clear. >>> >>> 5. SF0 Cell Estimation Algorithm >>> ü What is incoming cells and outgoing cells? Are they Rx cells and Tx >>> cells, respectively? >>> ü What is “used cells”? Is it same as “scheduled cells”? If not, how >>> to count used cells. >>> >>> 6. SF0 Allocation Policy >>> ü “The number of cells to be *scheduled/deleted*” ==> “added/deleted”? >>> ü “3. If SCHEDULEDCELLS*<=*REQUIREDCELLS, add one or more cells.” ==> >>> “3. If SCHEDULEDCELLS<REQUIREDCELLS, add one or more cells.” >>> ü When and how the initial value of SCHEDULEDCELLS will be set? The >>> initialization should include not only setting SCHDULEDCELLS equal to >>> SOFTHRESH, but also adding SOFTHRESH cells into schedule for starting the >>> state machine described in Fig.1. >>> >>> 7. Rules for CellList >>> ü “verifying that the slot offset and channel offset are not occupied >>> and choose channelOffset randomly for each cell” ==> “verifying that the >>> slot offset is not occupied and choose channelOffset randomly for each cell” >>> >>> 10. Node Behavior at Boot >>> ü Should the initialization of SCHEDULEDCELLS happen at boot? >>> >>> If you have any question regarding it, please feel free to contact me. >>> >>> Thanks >>> Qin >>> _______________________________________________ >>> 6tisch mailing list >>> [email protected] >>> https://www.ietf.org/mailman/listinfo/6tisch >>> >>> >>> >>> _______________________________________________ >>> 6tisch mailing list >>> [email protected] >>> https://www.ietf.org/mailman/listinfo/6tisch >>> >>> >> >> >> -- >> _______________________________________ >> >> Thomas Watteyne, PhD >> Research Scientist & Innovator, Inria >> Sr Networking Design Eng, Linear Tech >> Founder & co-lead, UC Berkeley OpenWSN >> Co-chair, IETF 6TiSCH >> >> www.thomaswatteyne.com >> _______________________________________ >> > > > > -- > DIEGO DUJOVNE > Profesor Asociado > Escuela de Informática y Telecomunicaciones > Facultad de Ingeniería - Universidad Diego Portales - Chile > www.ingenieria.udp.cl > (56 2) 676 8125 > -- _______________________________________ Thomas Watteyne, PhD Research Scientist & Innovator, Inria Sr Networking Design Eng, Linear Tech Founder & co-lead, UC Berkeley OpenWSN Co-chair, IETF 6TiSCH www.thomaswatteyne.com _______________________________________
_______________________________________________ 6tisch mailing list [email protected] https://www.ietf.org/mailman/listinfo/6tisch
