I had a similar problem, except I had Windows 2000 locking up at 90% into the burn.
- First, install the latest update fo Nero of your version. - Check for any firmware updates for your burner - Install the latest BIOS flash for your computer (go to the manufacturer's website for these updates) - If you have another CD-ROM drive on the same ribbon cable, try disconnecting it. - Make sure the burner is on the MASTER jumper setting (and the other is on SLAVE) - If you can't resolve this, try turning off DMA. Instructions vary for each OS. --- In [email protected], [EMAIL PROTECTED] wrote: > I can't burn onto a dvd-r, but every dvd that I copy using DVD shrink and > dvdxcopy burns fine onto a dvd-rw. I have used 3 different brands of dvds and > none of them will complete a burn, they all have write errors. Then I use a > ritek dvd-rw and burn to that then turn around and copy that disc to a regular > dvd-r using nero (copy full disc) and that works fine. I can't find come up > with any solutions and this is happening with 2 burners. I am ready to go out > and buy a new one...anyone have any suggestions? > > > [Non-text portions of this message have been removed] If you have any questions or problems with any aspect of this site, please feel free to contact me directly [EMAIL PROTECTED] Please do not post personal issues directly to the group. To unsubscribe from this list, send an email to [EMAIL PROTECTED] Thank you for using A-1 Computer Tech Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/A-1-Computer_Tech/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
