Hi Thomas Well I flashed the drive and it was successful but the DVDs didn't work!! And formatted the drive again but not using a quick format I also took-off the BIOS battery and RAMs but the computer refused to start without RAM Then put RAMs back and tested with no battery for BIOS and this also didn't do anything. I also removed all drives and booted then turned off computer and put them back with no luck. I don't think there are any more tricks. What is the idea of the CDs working and DVDs not!! With just a DMA click. Thanks -----Original Message----- From: N. Thomas [mailto:[EMAIL PROTECTED] Subject: [A-1-Computer_Tech] Re: DVD & DMA & PIO
Disable DMA first. If this doesn't work try the firmware flash. (Sometimes a firmware flash is needed to make DMA work later) <http://us.adserver.yahoo.com/l?M=298184.6191685.7192823.3001176/D=group s/S=:HM/A=2593423/rand=448076799> [Non-text portions of this message have been removed] If you have any questions or problems with any aspect of this site, please feel free to contact me directly [EMAIL PROTECTED] Please do not post personal issues directly to the group. To unsubscribe from this list, send an email to [EMAIL PROTECTED] Thank you for using A-1 Computer Tech Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/A-1-Computer_Tech/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
