N. Thomas,
> Make sure the master is at the end of the cable and the slave is on
> the other connector.
Unless a drive is jumpered for 'cable select' the position on the cable
where the drive is connected does not matter. And I think that you need a
special cable for cable select to even work. I haven't used cable select in
quite some time.
In addition, if you have only one drive on the ribbon cable the jumpers may
not even matter, depends on either the drive or the drive interface, I'm not
sure.
Jim
If you have any questions or problems with any aspect of this site, please feel
free to contact me directly [EMAIL PROTECTED] Please do not post personal
issues directly to the group.
To unsubscribe from this list, send an email to [EMAIL PROTECTED]
Thank you for using A-1 Computer Tech
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/A-1-Computer_Tech/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
