The birds are singing the sun is shining nature is harmony with itself and my USB is working just dandy. Thank you N.Thomas! You really help make this a great group by freely offering your valuable time.
I followed your instructions and it finally came together. The camera had a problem for the longest time trying to find a file. It finally did I don't know how... it was kinda like magic. It was the discvxd.inf file it was looking for. I saw the file when looked at the expanded driver program in WinZip and when I looked at the disk in MS Dos but it didn't show looking in Windows Explorer or in the window that came up when the computer was looking to install it. For the longest time it appeared that the computer didn't see it either. All of a sudden ... I guess something clicked and it finally fell into place. Thanks again I really appreciate it! Sam --- In [email protected], "N. Thomas" <[EMAIL PROTECTED]> wrote: > You can find your Windows files in the \WIN98 folder on the Windows 98 > CD-ROM. > > To fix the USB device issues: > 1. Open the Device Manager, uninstall the items listed with yellow > exclamation marks or under "unknown devices" > 2. Open C:\WINDOWS\INF and delete the files relating to the drivers > for those devices. > 3. USe Add/Remove programs to uninstall the drivers. > 4. Open C:\WINDOWS\TEMP and delete all the files. > 5. Reboot with the devices disconnected. > 6. Use the downloaded versions to reinstall the drivers, following the > instructions carefully. Attach the devices only when insctructed. > > > > --- In [email protected], "artmansam" <[EMAIL PROTECTED]> > wrote: > > Jim, > > > > Thank you very much for all your help! > > > > USB was disabled in BIOS. > > > > After enabling it my USB scanner worked but I still can't get my > > digital camera or card reader to work. > > Software has been installed for both of these items but each time it > > the computer detects new hardware it looks for software and can't > > find it. > > > > When it tries to find the driver for the ScanDisk card reader it > > reports that it can't find "delentry.exe". I downloaded the file > > from the web and it still says that it can't find it. > > > > It doesn't like the USB driver, for the camera, on floppy I > > downloaded a fresh file from the camera's web page with no better > > luck. > > > > This is an integrated computer very few cards but made sure they > > were all seated. > > > > I ran SFC several files came up as possible problems ] > > But these could have just been files that were updated correct? > > > > The first questionable file reported was "user.exe" with the windows > > 98 CD in the drive I tried to replace it but I didn't now where it > > was on the disk > > > > The service pack 2 is a very cool find! Thanks I thank I'll save > > it for another time unless you still think it might help. > > > > How do you rerun Windows 98 setup in "upgrade mode"? > > A problem would be all the Windows updates I've done over the years > > would be lost. > > > > I think it must have something to do with the "delentry.exe" > > file. > > > > Thanks again for all the help > > Sam > > --- In [email protected], "N. Thomas" <[EMAIL PROTECTED]> > > wrote: > > > Possible causes: > > > - USB support is disabled in the BIOS. Enter the CMOS Setup and > > turn > > > it on. > > > - You have a PCI USB card and it is not seated; reseat the card with > > > the power disconnected. > > > - The ESCD area is invalid or incomplete. Set the Clear ESCD option > > > in the BIOS or clear the CMOS completely. > > > - USB support in the OS is corrupted, apply SESP 2.x to attempt to > > > repair the files. > > > See: http://exuberant.ms11.net/98sesp.html > > > - An unknown software problem has occurred, use SFC to attempt > > repairs > > > or rerun Windows 98 setup in upgrade mode > > > > > > > > > --- In [email protected], "artmansam" > > <[EMAIL PROTECTED]> > > > wrote: > > > > I deleted files as instucted ... but without joy. > > > > After re-booting files did not appear in Device Manager nor did > > the > > > > computer ask for disk. > > > > > > > > > > > > > > > > --- In [email protected], "N. Thomas" <[EMAIL PROTECTED]> > > > > wrote: > > > > > Yes, delete all the items listed, then reboot. > > > > > > > > > > --- In [email protected], "artmansam" > > > > <[EMAIL PROTECTED]> > > > > > wrote: > > > > > > That's an affirmative! > > > > > > > > > > > > Universal Serial Bus does show up in Safe Mode! > > > > > > > > > > > > > > > > > > I am not allowed to delete a category, i.e., I can only > > delete > > > > the > > > > > > items in the folder "Universal Serial Bus Controllers" but > > not > > > > the > > > > > > folder itself. > > > > > > > > > > > > Do you advise that I delete everything that is in the folder > > or > > > > > > category? > > > > > > > > > > > > The items are: > > > > > > > > > > > > General Purpose USB Hub > > > > > > General Purpose USB Hub > > > > > > SiS 7001 PCI to USB Open Host Controller > > > > > > USB Composite Device > > > > > > USB Root Hub > > > > > > > > > > > > Thanx > > > > > > Sam > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- In [email protected], "N. Thomas" > > <[EMAIL PROTECTED]> > > > > > > wrote: > > > > > > > Check the Device Manager while in Safe Mode. > > > > > > > I bet the USB controller shows up there. Delete it and > > allow > > > > > > Windows > > > > > > > to reinstall the USB support. If it requests the Windows > > 98 > > > > disc, > > > > > > > provide it. It's likely a corrupted support file. > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- In [email protected], "artmansam" > > > > > > <[EMAIL PROTECTED]> > > > > > > > wrote: > > > > > > > > Yeah ...I was using both a digital camera and a scanner, > > both > > > > > > USB. I > > > > > > > > had a much faster machine at work and had stoped using my > > > > home > > > > > > > > computer all that much. One day I tried to download some > > > > > > pictures > > > > > > > > from the camera, at home, and it wouldn't work. How do I > > get > > > > into > > > > > > > > bios? Or is there some cofiguration somewhere ... where > > a > > > > box > > > > > > could > > > > > > > > have got un-checked? I was never a wiz ... but I used to > > > > know a > > > > > > > > little bit more about this stuf ... I haven't been using > > > > it ... > > > > > > and > > > > > > > > you know what happens when you don't use it. > > > > > > > > Sam > > > > > > > > > > > > > > > > > > > > > > > > --- In [email protected], Jim Purcell > > > > > > <[EMAIL PROTECTED]> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > How about Windows Update? Would the program detect > > > > > > > > > > that I needed some USB support? > > > > > > > > > > > > > > > > > > Have you used USB on that machine. It just came to mind > > > > that > > > > > > the > > > > > > > > > problem might be USB 1 vs. USB 2, but something would > > show > > > > up > > > > > > in > > > > > > > > > either the bios or in the device manager. > > > > > > > > > > > > > > > > > > Jim If you have any questions or problems with any aspect of this site, please feel free to contact me directly [EMAIL PROTECTED] Please do not post personal issues directly to the group. To unsubscribe from this list, send an email to [EMAIL PROTECTED] Thank you for using A-1 Computer Tech Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/A-1-Computer_Tech/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
