Greetings Matty How is your Dos coming along and did you find those pictures you never lost?
What you need is a Hyper Threading Spooler, try Goggling for it and when you find it don't tell us otherwise you will have to thank us, well not all of us, one of us doesn't need any thanks. bcnu No6 ó/O Who is No1? 666666666666666666666 ó/O 666666666666666666666 --- In [email protected], "Matt" <[EMAIL PROTECTED]> wrote: > > > Playing games need many cycles or any video work.Going on the > internet or e-mail does not need many cycles Using a P1 or P4 will > be the same speed for using the internet or e-mail has the clock > cycles needed to open internet or e-mail program as not change > > Playing games ,running more than one program,video work,animation > need many clock cycles if the CPU cannot perform it as to stack the > requests and take on one task at a time and this low the computer > down. > > > Playing Doom3 there is high graphics and more graphics means more > calculation. Also more movement on the board in doom 3 means more > calculation. > > Video work needs many calculation .There are many Video cards that > have a processor on the card to calculate all those frames, movement, > instruction, pixel,placmet so on > > > > > > > --- In [email protected], "N. Thomas" <[EMAIL PROTECTED]> > wrote: > > > > The 'X', it's called marketing... > > > > It's quite simple, two CPUs can't work on the same operation at > once. > > To utilize the two CPU cores, the software divides work into > > 'threads'. Each thread is run on a separate processor, provided the > > software you're running can handle this. The results are tossed > > together at the end. > > > > If the software you're running can only handle threads in a serial > > manner, and not simulatenously, then the second CPU will be idle and > > not assisting the software. > > HyperThreading also needs multithreaded software to utilize this > > feature. But in this case, HyperThreading simulates a second CPU > that > > is of lesser power than the first one. When an instruction is sent > to > > a CPU, not always are the circuits completely utilized. With > > HyperThreading the unused circuits are then re-used at the same time > > to work on another thread of instructions. The CPU shows istself as > > two CPUs to the operating systems to enable this feature. > > > > > > --- In [email protected], "Matt" <[EMAIL PROTECTED]> > wrote: > > > > > > > > > > > > So than what does the X mean ?? > > > > > > > > > > This isn't at all how these CPUs work. The DualCore CPUs, > available > > > > from Intel and AMD don't give you 2x the MHz rating. (I'll > explain > > > in > > > > a moment.) > > > > > > > > > so you saying even the 2 processors ,it really is one becuse thay > > > don't perform like 2 processors thay devide the work load .But it > > > only works if the software supports it . > > > > > > And HyperThreading only devides the work in small chunks? > > > > > > > > > > > > > > > > > > > > > > > > In addition, the MHz rating really doesn't affect computer > > > > performance as much as you think, many other systems come into > play > > > to > > > > determine the performance and reliability of a PC. > > > > > > > > > AMD does not list MHz thay list a model number like AMD Athlon 64 > > > 3200+, AMD Athlon 64 3500,Athlon 64 4000, yes the higher the > number > > > the better > > > > > > AMD Athlon 64 3200+, runs at 2.00 GHz > > > AMD Athlon 64 3500+, runs at 2.2 GHz > > > AMD Athlon 64 4000+ runs at 2.40 GHz > > > AMD Athlon 64 2800+, runs at 1.80 GHz > > > > > > More at http://www.compusa.com/products/products.asp? > > > N=200136+400950&Ne=400000 > > > > > > The 64 means it is a 64-bit processors .As 32-bit processing is > on > > > its way out. > > > > > > > > > I don't have the money for AMD Athlon 64 X2 3800+ I need to go > down > > > but better than Intel celeron 1.8GHz .In the future if I have the > > > money I will get AMD Athlon 64 X2 4800. > > > > > > ------------------------ Yahoo! Groups Sponsor --------------------~--> Fair play? Video games influencing politics. Click and talk back! http://us.click.yahoo.com/u8TY5A/tzNLAA/yQLSAA/67folB/TM --------------------------------------------------------------------~-> If you have any questions or problems with any aspect of this site, please feel free to contact me directly [EMAIL PROTECTED] Please do not post personal issues directly to the group. To unsubscribe from this list, send an email to [EMAIL PROTECTED] Thank you for using A-1 Computer Tech Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/A-1-Computer_Tech/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
