Thomas,
> Since it's a new drive there's an even better chance that a firmware
> upgrade can possibly correct your problems.
I will reserve the hardware flash upgrade until later. I have to first find
out the makes and models of the drives and go to the mfg site, etc. I don't
like doing that with big companies. I downloaded drivers for a gfx card on
one machine and the screen looks terrible, command screen har redish
letters.
> The burning can fail due to slight imperfections and changes in the CD
> (even as they are re-burned as with RW).
But the burning program, Nero, said that the burn was successful.
> Manufacturers write software routines for specific discs and speeds to
> correct for the variation of colours and reflectivity between
> different makes of disc. The firmware updates are how you get these
> improved routines into your drive and can improve your success rate
> when burning.
This is going to take some probing. But tnx for the information.
Jim
If you have any questions or problems with any aspect of this site, please feel
free to contact me directly [EMAIL PROTECTED] Please do not post personal
issues directly to the group.
To unsubscribe from this list, send an email to [EMAIL PROTECTED]
Thank you for using A-1 Computer Tech
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/A-1-Computer_Tech/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
