> yep, this boots fine. The toolchain problem is weird. Maybe we should compare > the disassembly between 4.6.1 (I have gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) > 4.6.1) and 4.6.2 (where to get this from)? Are you using a cross compiler or > native?
I used the cross compiler in 12.04 which is now at 4.6.2. > > Jani, it also seems you forgot to sound support. You need to enable some > codecs, I know it works on 3.0 if it is enabled ... Hmm I know I added missing USB_AUDIO at one point, but will check and fill in the missing configs. I thought I reused the 2.6.38 configs. > >> I am not sure if it is an unrelated toolchain issue, or only triggered >> along with the RAM timing change, but I suspect >> it is toolchain only. I rebuilt a 2.6.38 too with the 4.6 toolchain >> and it did not boot. >> >> I'll need to back that change up and rebuild again to make sure. >> >> So I had the deb working locally as I did not yet upgrade to 4.6.2 but >> when built in the archive it resulted in an unbootable image. > > ah, native. So I'll need to upgrade tho 12.04 I guess to be able to reproduce > it :-( Probably, or you could just get gcc-4.6 from 12.04, it should work with few extra dependencies. > > Thanks > > Marc > >> On Thu, Dec 15, 2011 at 9:20 AM, Marc Dietrich <[email protected]> wrote: >> > On Thursday 15 December 2011 01:33:14 Jani Monoses wrote: >> >> I made a new deb from latest git branch but now it no longer boots on >> >> my machine. >> >> I also have hynix RAM, so it is even more strange that the Dec 6 >> >> snapshot booted. >> > >> > also fails here. Kernel boots with my config (paz00_defconfig) and your >> > configs didn't changed as it seems. On the other hand, you seem to have >> > changed the toolchain: gcc 4.6.1 -> 4.6.2. Do you still have the old >> > compiler around? Is this compiled on a hf system? >> > >> > Marc >> > >> >> Jani >> >> >> >> http://startx.ro/~jani/linux-image-3.0.8-2-ac100_3.0.8-2.1_armel.deb >> >> >> >> On Wed, Dec 14, 2011 at 8:02 PM, Jani Monoses <[email protected]> wrote: >> >> > Thanks for the feedback, good to know. >> >> > Others have reported it not booting at all on armhf builds, but if >> >> > it >> >> > is memory related they'll likely hit >> >> > the same issue on armel. >> >> > >> >> > I'll roll a new package for the more recent tree these days then, >> >> > once >> >> > your change is in. >> >> > >> >> > Jani >> >> > >> >> > On Wed, Dec 14, 2011 at 7:54 PM, Marc Dietrich <[email protected]> wrote: >> >> >> Hi Jani, >> >> >> >> >> >> thanks for the new kernel! >> >> >> >> >> >> On Wednesday 14 December 2011 01:38:51 Jani Monoses wrote: >> >> >>> >> However we should aim for stability and no churn towards >> >> >>> >> the >> >> >>> >> end of >> >> >>> >> the cycle(March/April) >> >> >>> >> Are there any known regressions vs 2.6.38? Is sound not >> >> >>> >> working yet? >> >> >>> > >> >> >>> > sound works as on 2.6.38 (maybe better, no mic support >> >> >>> > yet). No >> >> >>> > regressions I know of by now (but I'm a bad tester). It is >> >> >>> > possible >> >> >>> > that people with hynix memory may not be able to boot. >> >> >>> > Some IRC >> >> >>> > user >> >> >>> > wanted to test it this evening. If it doesn't work, I'll >> >> >>> > disable >> >> >>> > the >> >> >>> > memory scaling feature again. >> >> >>> >> >> >>> Here's a 3.0 deb of the snapshot of a week ago >> >> >>> >> >> >>> >> >> >>> http://startx.ro/~jani/linux-image-3.0.8-1-ac100_3.0.8-1.1_arm >> >> >>> el.deb >> >> >>> >> >> >>> >> >> >>> For me resume does not work on a stock Ubuntu Precise install, >> >> >>> which >> >> >>> worked with the default 2.6.38 kernel. >> >> >>> I get noise on the screen, the machine does not answer key >> >> >>> presses >> >> >>> or pings.>> >> >> >> >> >> >> I tested it on Oneiric (armel). It boots and suspends/resumes >> >> >> without >> >> >> problems. One possible issue is that the kernel likely fails on >> >> >> hynix >> >> >> ram based system as I only fixed this issue on Dec. 9th and the >> >> >> kernel is form Dec. 6th. >> >> >> >> >> >> The resume problems you see may also be RAM clocking related >> >> >> (the >> >> >> noice on the screen). So I better disable the stuff alltogether >> >> >> as it >> >> >> seems to create a lot of problems. I will push a fix in a minute >> >> >> ... >> >> >> >> >> >> Marc >> >> >> >> >> >>> commit 735f939f421c6c9c5db79250955e7b25ee272e0f >> >> >>> Author: Marc Dietrich <[email protected]> >> >> >>> Date: Tue Dec 6 20:35:30 2011 +0100 >> >> >>> >> >> >>> ARM: tegra: paz00: make sound modular >> >> >>> >> >> >>> Switch the static sound driver from chromeos to modular >> >> >>> version >> >> >>> used by 2.6.38 kernels. >> >> >>> >> >> >>> Signed-off-by: Marc Dietrich <[email protected]> _______________________________________________ Mailing list: https://launchpad.net/~ac100 Post to : [email protected] Unsubscribe : https://launchpad.net/~ac100 More help : https://help.launchpad.net/ListHelp
