Gurcharan Not sure if this would be of interest, but the AG projects VB and VX were two projects that looked to implement this. I am not sure if there is any "production ready" tools available, but if you were looking at a developing project, someone might be able to "tweak" the code to make it work.
Anyway, both these projects can be found at http://www.accessgrid.org/projects. Rhys Hawkins and Rod Harris were the developers on these projects. If you would like to obtain the source, etc, I might be able to contact them and get a hold of it. Anyway, hope this provides some interest. Cheers, Jason. -----Original Message----- From: ag-tech-boun...@lists.mcs.anl.gov [mailto:ag-tech-boun...@lists.mcs.anl.gov] On Behalf Of Gurcharan S. Khanna Sent: Tuesday, 8 February 2011 3:45 AM To: ag-t...@mcs.anl.gov Subject: [AG-TECH] Unicast to Multicast one way bridge? hi, i'd like to connect a low bandwidth network AG node via unicast to a multicast bridge but i do not want the multicast streams sent back to the unicast source at all. can this be done with QuickBridge? or any other bridge? thanks, -gurcharan -- ------------------------- Gurcharan S. Khanna, Ph.D. Director of Research Computing Office of the Vice President for Research Assistant Research Professor, GCCIS Ph.D. Program Director, Interactive Collaboration Laboratory --- Rochester Institute of Technology One Memorial Drive Rochester, New York 14623-5603 Phone: 585-475-7504 ~ Cell: 585-451-8370 Email: gurcharan.kha...@rit.edu Web: http://rc.rit.edu Google Map: http://rc.rit.edu/directions.html
