Gurcharan I think i've another problem with regards to AccessGrid 3.1 , the new problem is that basic VideoConsumerService failed to start on the sender machine and can not know why , but i've traced the venueclient log , and noticed there that there is something wrong which i can not figure out how to solve it , here is the debug info :
http://pastebin.com/maa3bf08 the log shows that the service was about to start automatically but for some reasons it failed , i tried also to start it from AccessGrid node management menu , but a pop-up message appeared containing the same error message : Add Servicd Failed : VidoeConsumerService any workaround to solve this problem ? Regards Muhammad On Sun, Jul 19, 2009 at 6:23 PM, muhammad akl <muhammad....@gmail.com<mailto:muhammad....@gmail.com>> wrote: Gurcharan well, I can confirm that multicast is working as i can see the multicast address group in the DVTS Receiver window I'm streaming now again , if you're there you can check again my video Regards Muhammad On Sun, Jul 19, 2009 at 3:40 PM, Gurcharan S. Khanna <gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu>> wrote: muhammad, 3.2-Beta! I wish I had noticed that earlier! Yes, definitely stay away from that. There are known problems both with DVTS (and H264) in the beta. Now that you've discovered that, I have to say I have never seen the kind of artifacts that you show us in your DVTS image. I'm connected to your sever now but I guess you must have turned off your stream. I will check it again later. Also, you should check trying to receive an external stream as well. If you go to the RIT Venue at https://vv3.mcs.anl.gov:8000/Venues/8cdd226521d429b68e7e8c0158a6a663 there should be several DVTS streams available. As John said in an earlier email, make sure multicast is working (there are independent ways to test that). But it looks like something in your machine or local network possibly. -gurcharan muhammad akl wrote: hi Gurcharan, John Firstly appreciated your help both , I think now the problem has taken another curve , i mean i've downgraded AccessGrid version from 3.2-Beta to AccessGrid 3.1 stable release ( also using the easyinstaller package) , and as i previously did , i've configured AccessGrid on the sender Pc to use the ExtendedVideoProducerService and again i can see my video signal fine without any problem Now at the receiver Pc , I've configured it to use the ExtendedVideoConsumerService and now it pops up the DVTS screen and I can see the stream sent by my sender pc , and did as Gurcharan said , that I clicked on each of those text lines and the DVTS window was brought up with the following problem within it : http://muhammad.akl.googlepages.com/19072009367.jpg As you can see the video is corrupted and is not clear , what can cause this problem ? my AccessGrid Server url is https://ag0.mans.edu.eg<https://ag0.mans.edu.eg/> <https://ag0.mans.edu.eg/> Our Bridge Name : Mansoura University Regards Muhammad On Sun, Jul 19, 2009 at 2:08 AM, John I. Quebedeaux, Jr <jo...@lsu.edu<mailto:jo...@lsu.edu> <mailto:jo...@lsu.edu<mailto:jo...@lsu.edu>>> wrote: Muhammad, on Monday I can put up a DVTS stream into a lobby (let me know which you’re playing in, there are several these days – Louisiana has their own for example) and see what’s up. Confirm you have multicast working... It’s not clear from you on the display (receiver) machine if DVTS is starting, if you’re getting errors, etc. Is it starting but not showing anything? Can you confirm the multicast addresses involved? Are you getting “video” but it’s black for example? Thanks, John Q. -- John I. Quebedeaux, Jr.; Louisiana State University Computer Manager LBRN; 131 Life Sciences Bldg. e-mail: jo...@lsu.edu<mailto:jo...@lsu.edu> <http://johnq<http://johnq/>@lsu.edu/<http://lsu.edu/>>; web: http://lbrn.lsu.edu<http://lbrn.lsu.edu/> <http://lbrn.lsu.edu/> phone: 225-578-0062 / fax: 225-578-2597 ------------------------------------------------------------------------ *From: *muhammad akl <muhammad....@gmail.com<mailto:muhammad....@gmail.com> <http://muhammad.akl<http://muhammad.akl/>@gmail.com/<http://gmail.com/>>> *Date: *Sat, 18 Jul 2009 19:39:16 +0300 *To: *Gurcharan Khanna <gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu> <http://gurcharan.khanna<http://gurcharan.khanna/>@rit.edu/<http://rit.edu/>>> *Cc: *<ag-t...@mcs.anl.gov<mailto:ag-t...@mcs.anl.gov> <http://ag-tech<http://ag-tech/>@mcs.anl.gov/<http://mcs.anl.gov/>>> *Subject: *Re: [AG-TECH] sending dv/hdv via accessgrid all in one hi Gurcharan, well, the problem mainly is that i'm unable to receive my video signal at the receiver side , which actually i can see it via DVTS program at the sending side let's explain my setup in more details , i've two pcs their specs as follows : Sender PC OS : Windows XP SP3 AccessGrid Ver : 3.2 Beta version ( All in one Installer made by http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer) Processor: Intel core 2 duo 2.3 GHZ Ram : 2 GB VGA Card : Nvidia 8400 GS ( Driver installed via nvidia website ) Ethernet Type : Gigabit ethernet Firewire ports : External Pci card has two IEEE-1394 ports Input Camera : Sony DCR-TRV285E Receiver PC OS : Windows XP SP3 AccessGrid Ver : 3.2 Beta version ( All in one Installer made by http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer) Processor : intel pentium D 3.4 GHZ Ram : 512 MB VGA Card : Nvidia 8400 GS ( Driver installed via nvidia website ) Ethernet type : fast ethernet Now , The sender Pc is configured to Start sending Digital Video via ExtendedVideoServiceProducer Option which is found in the AccessGrid node management menu , that i've included during the installation of AccessGrid , And at this time i can see my video signal via DVTS program At the Receiver Side , I've started AccessGrid and configured It to use The ExtendedVideoConsumerService from AccessGrid node Management menu by adding a new service , and at this time i can not see anything , and no error messages appeared does my setup lacks something that's i've fogotten to do , or does i need much horse power for my PCS ? if though , what are the necessary steps to be done to be able to send and/or receive dv/hdv on windows xp ? Regards Muhammad On Sat, Jul 18, 2009 at 5:31 PM, Gurcharan S. Khanna <gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu> <http://gurcharan.khanna<http://gurcharan.khanna/>@rit.edu/<http://rit.edu/>>> wrote: hi, we use it constantly. can you give us more details about your problem? e.g., specific error messages? -gurcharan muhammad akl wrote: hello, I've just installed the recent all in one accessgrid package on windows xp , the installation process went fine , and i've added the extended video services during the installation as I want to start sedning dv/hdv video via firewire cameras , after i've joined the lobby , i've configured the ExtendedVideoProducerService , and I can see my video fine via the DVTS program , but the problem that i'm unable to receive it via ExtendedVideoConsumerService ,I've tried several times to enable and disable the service with no luck Anyone had a previous experience on how to get dv/hdv video on windows xp using this all in one (which includes the DVTS ) ? also anyone tried the enhanced vic that was made by vislab team (chris willing ) on windows xp and successed to integrate it with accessgrid ? -- ------------------------- Gurcharan S. Khanna, Ph.D. Director of Research Computing Office of the Vice President for Research http://rc.rit.edu<http://rc.rit.edu/> <http://rc.rit.edu/> <http://rc.rit.edu/> Assistant Research Professor, Ph.D. Program Golisano College of Computing and Information Sciences http://people.rit.edu/gskpop Director, Interactive Collaboration Environments Laboratory, Center for the Advancing the Study of Cyberinfrastructure http://icelab.rit.edu<http://icelab.rit.edu/> <http://icelab.rit.edu/> <http://icelab.rit.edu/> --- Rochester Institute of Technology 1 Lomb Memorial Drive Rochester, New York 14623-5603 Phone: 585-475-7504 ~ Cell: 585-451-8370 Email: gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu> <http://gurcharan.khanna<http://gurcharan.khanna/>@rit.edu/<http://rit.edu/>> -- ------------------------- Gurcharan S. Khanna, Ph.D. Director of Research Computing Office of the Vice President for Research http://rc.rit.edu<http://rc.rit.edu/> Assistant Research Professor, Ph.D. Program Golisano College of Computing and Information Sciences http://people.rit.edu/gskpop Director, Interactive Collaboration Environments Laboratory, Center for the Advancing the Study of Cyberinfrastructure http://icelab.rit.edu<http://icelab.rit.edu/> --- Rochester Institute of Technology 1 Lomb Memorial Drive Rochester, New York 14623-5603 Phone: 585-475-7504 ~ Cell: 585-451-8370 Email: gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu>
