hi Gurcharan, well, the problem mainly is that i'm unable to receive my video signal at the receiver side , which actually i can see it via DVTS program at the sending side
let's explain my setup in more details , i've two pcs their specs as follows : Sender PC OS : Windows XP SP3 AccessGrid Ver : 3.2 Beta version ( All in one Installer made by http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer) Processor: Intel core 2 duo 2.3 GHZ Ram : 2 GB VGA Card : Nvidia 8400 GS ( Driver installed via nvidia website ) Ethernet Type : Gigabit ethernet Firewire ports : External Pci card has two IEEE-1394 ports Input Camera : Sony DCR-TRV285E Receiver PC OS : Windows XP SP3 AccessGrid Ver : 3.2 Beta version ( All in one Installer made by http://www.hitlabnz.org/wiki/Access_Grid_-_Easy_Installer) Processor : intel pentium D 3.4 GHZ Ram : 512 MB VGA Card : Nvidia 8400 GS ( Driver installed via nvidia website ) Ethernet type : fast ethernet Now , The sender Pc is configured to Start sending Digital Video via ExtendedVideoServiceProducer Option which is found in the AccessGrid node management menu , that i've included during the installation of AccessGrid , And at this time i can see my video signal via DVTS program At the Receiver Side , I've started AccessGrid and configured It to use The ExtendedVideoConsumerService from AccessGrid node Management menu by adding a new service , and at this time i can not see anything , and no error messages appeared does my setup lacks something that's i've fogotten to do , or does i need much horse power for my PCS ? if though , what are the necessary steps to be done to be able to send and/or receive dv/hdv on windows xp ? Regards Muhammad On Sat, Jul 18, 2009 at 5:31 PM, Gurcharan S. Khanna <gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu>> wrote: hi, we use it constantly. can you give us more details about your problem? e.g., specific error messages? -gurcharan muhammad akl wrote: hello, I've just installed the recent all in one accessgrid package on windows xp , the installation process went fine , and i've added the extended video services during the installation as I want to start sedning dv/hdv video via firewire cameras , after i've joined the lobby , i've configured the ExtendedVideoProducerService , and I can see my video fine via the DVTS program , but the problem that i'm unable to receive it via ExtendedVideoConsumerService ,I've tried several times to enable and disable the service with no luck Anyone had a previous experience on how to get dv/hdv video on windows xp using this all in one (which includes the DVTS ) ? also anyone tried the enhanced vic that was made by vislab team (chris willing ) on windows xp and successed to integrate it with accessgrid ? -- ------------------------- Gurcharan S. Khanna, Ph.D. Director of Research Computing Office of the Vice President for Research http://rc.rit.edu<http://rc.rit.edu/> Assistant Research Professor, Ph.D. Program Golisano College of Computing and Information Sciences http://people.rit.edu/gskpop Director, Interactive Collaboration Environments Laboratory, Center for the Advancing the Study of Cyberinfrastructure http://icelab.rit.edu<http://icelab.rit.edu/> --- Rochester Institute of Technology 1 Lomb Memorial Drive Rochester, New York 14623-5603 Phone: 585-475-7504 ~ Cell: 585-451-8370 Email: gurcharan.kha...@rit.edu<mailto:gurcharan.kha...@rit.edu>
