This may be an issue with the Realtek AC 97 on board audio. I have experienced the same thing in AG V3.0.1. Are you using an audio card or on board audio?
Thanks, John John Langkals Systems Manager OCTS M2021 Physics Research Building 191 West Woodruff Avenue Columbus, Ohio 43210 614.292.6957 Office 614.327.3732 Cell 614.292.7557 FAX www.octs.osu.edu ________________________________________ From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov] On Behalf Of Adam Taylor Sent: Thursday, June 29, 2006 2:46 PM To: 'Richard Caladine'; 'ag-tech' Subject: RE: [AG-TECH] problems with RAT hanging This is a ditto for me. I was figuring it was my OS needing to be reinstalled, new drivers, whatever. I haven't had time to test it yet however. Before I started over I was getting about the same exact thing.. Although mine would start between anywere from 15 min to 3 hours. Usually however, the 15-20 min as below. The GUI would keep working but the in and out of the sound, plus the meters on rat, would stop working. The menus and buttons however kept working...at least they were clickable.. Adam Taylor Computing Center University of Louisiana at Monroe ________________________________________ From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov] On Behalf Of Richard Caladine Sent: Thursday, June 29, 2006 1:26 AM To: ag-tech Subject: [AG-TECH] problems with RAT hanging Hi All, In the last few AG sessions we have held everything works well for about the first 15-20 minutes. Then RAT stops sending and receiving. The only way I can get audio working again (without exiting and restarting the venue client) is to disable and re-enable audio. However the problem reoccurs at about 5 minute intervals after that ad infinitum! any ideas? I am using V3.0.1 Richard ________________________ Dr Richard Caladine Program Coordinator LIFT (Learning, Innovation and Future Technologies) CEDIR (Centre for Educational Development and Interactive Resources) University of Wollongong NSW 2522 Australia phone +61 2 4221 4138 fax +61 2 4225 8312 http://cedir.uow.edu.au/lift
