Steven: You could try running these commands with the '-d' option on the command-line, which will dump additional debug information as it runs. This might help you understand the problem. The additional information also appears in the related log files (in ~/.AccessGrid/Logs); if you don't see a clear indication of the problem there, you can send the log file to me for a look.
Tom On 11/22/05 2:54 AM, Steven wrote: > Thanks Chris but it drops out of certmgr at the end returning to the Linux > command prompt, sorry could have made that clearer. > > Steven > > -----Original Message----- > From: Christoph Willing [mailto:will...@itee.uq.edu.au] > Sent: 21 November 2005 22:03 > To: Steven > Subject: Re: [AG-TECH] Can't read proxy > > > On 22/11/2005, at 3:41 AM, Steven wrote: > > >>Hi I have built AG2.4 on a Gentoo 2.6.12-r6 system. Running certmgr.py >>results in the output below, where after some delay returns to the >>command >>prompt. >> >>Running NodeSetupWizard.py, VenueClient.py, etc does much the same >>before >>bringing up the certificate request application, where after >>cancelling or >>completing this results in the application hanging. >> >>The certificate files in the CAcertificates directory appear to be >>okay >>Any help appreciated. > > > Steven, > > The "ERROR" responses are normal; in gereral, ignore them. When > certmgr returns to the command prompt, type: > ? > for a list of possible commands. Your most common commands will be: > list > show <n> > import <some_cert> > > > chris > > > Christoph Willing +61 7 3365 8350 > QPSF Access Grid Manager > University of Queensland > > > > >
