Hi All, I am currently trying it on XP Pro SP2 with multicast. Recording seems to work fine (the file got some size). When playing back, I don't see vic and rat starting.
I am not sure what I am doing wrong. Attached is a snaphot. Note the "File Offset: .....out of 0 bytes" ???? TIA Monika > > Win XP Pro SP2. Works like a charm in multicast. > > Zsolt > > > _ _ _ > > Zsolt Nagykaldi, PhD > Research Associate, Clinical IT Specialist > University Of Oklahoma Health Sciences Center > Department Of Family And Preventive Medicine > Oklahoma Center For Family Medicine Research > > 900 NE 10th Street > Oklahoma City, OK 73104 > Phone: (405) 271-8000 Ext.:1-32212 > Fax: (405) 271-1682 > > ________________________________ > > From: dcpi...@indiana.edu [mailto:dcpi...@indiana.edu] > Sent: Wed 11/9/2005 7:07 PM > To: Nagykaldi, Zsolt F. (HSC) > Cc: Access Grid Technical mailing list > Subject: RE: [AG-TECH] Release of AGVCR - recording AG > sessions > > > > > Hi Zsolt, > > Yea, that's one thing noted in the 'known issues', the > problem with recording from unicast. I'm glad to hear > AGConnector helped, I like that program. There's some old > code in there that I wrote for trying to send data to > QuickBridge (since it seems to need to receive something > in order to send data back to you) but I never did get it > working to any satisfaction. > > Since I'm replying to all I was aware (as is typical after > announcing something works) that under Windows now it > appears to have problems with reading or displaying the > file length, something for me to look at tomorrow. > > Growing pains I think, I've been rewriting a lot of it > (under Linux for the most part) in the last few weeks as > I've considered more things that I wanted to add, and lo > today I 'got the nod' to release it. So I thought I'd let > everyone take a look instead of me sitting on it a moment > longer. This may be good and bad, but as long as everyone > treats it as 'alpha' for now until more testing is done > then I think we'll all be good. I do not think the file > format will need to change, given all that I have in my > 'future plans', so any recordings made now will work in > later versions. If for some reason it does, I will make > available the converter program I have used to convert > previous recordings to the new format. > > Thanks for trying it out, incidentally, what version did > you use, Windows or Linux? > > Derek > > Quoting "Nagykaldi, Zsolt F. (HSC)" > <zsolt-nagyka...@ouhsc.edu>: > > > > > Fantastic Derek, thanks! One thing. In bridged unicast > > the recorder can not establish connection with the IPs > > and ports listed. However, in multicast (even with the > > AG Connector) it rocks! > > Zsolt > > > > > > _ _ _ > > > > Zsolt Nagykaldi, PhD > > Research Associate, Clinical IT Specialist > > University Of Oklahoma Health Sciences Center > > Department Of Family And Preventive Medicine > > Oklahoma Center For Family Medicine Research > > > > 900 NE 10th Street > > Oklahoma City, OK 73104 > > Phone: (405) 271-8000 Ext.:1-32212 > > Fax: (405) 271-1682 > > > > ________________________________ > > > > From: owner-ag-t...@mcs.anl.gov on behalf of Derek Piper > > Sent: Wed 11/9/2005 2:57 PM > > To: Access Grid Technical mailing list > > Subject: [AG-TECH] Release of AGVCR - recording AG > sessions > > > > > > > > > Hi all, > > > > I'm happy to announce that finally I've been > > given the go-ahead to release AGVCR to the community. It > > was a program I started writing around January and it > > was ready for release in a workable incarnation some > time in June. However, due to possible 'intellecual > > property' concerns from 'those that deal with those > > things' at IU, I was unable to release it back then. I > > declined to mention it to the community at large until > this release so as not to 'tease' people with a product > > they could not get. I won't get into griping about that > > on this list :> Some of you have known about this > > program earlier since we have had AccessGrid meetings > > that I have recorded. For those parties concerned, we > can communicate off-list on the best way to get the > > recordings to you. AGVCR is a program to record > > and play back the RTP/RTCP stream that an > > AccessGrid conference uses. The amount of data it > > gathers is certainly non-trivial, a few hours of > > recording with a number of participants can easily reach > > a few gigabytes in size. Timing and minimal overhead > > information is embedded in the file for accurate > playback. The website for the project is here: > > > > http://iri.informatics.indiana.edu/~dcpiper/agvcr/ > > > I invite anyone interested to take a look, > > download and use it to see > > what you think. I welcome feedback, please bear in mind > > though that it is still being actively worked on. A > > number of changes have been made of late, so testing has > > not been as extensive as it probably should be, but > that's another reason to get it out there. The website has > > source for Linux/Unix and a precompiled binary for > > Windows. I may add pre-compiled binaries for popular > Linuxes if there is interest. > > > Thanks, > > > > Derek > > > > -- > > Derek Piper - dcpi...@indiana.edu - (812) 856 0111 > > IRI 323, School of Informatics > > Indiana University, Bloomington, Indiana > > > > > > > > > > > > >
<<attachment: agvcr.jpg>>
