Hi Thomas,
I installed Beacon 1.1 on my laptop (windows xp).  At first it appeared that my 
beacon was not working.  I looked at the local loss link and I found 
system@Myip# in the host name. The IP Address was unresolveable.  Neither my 
hostname or ip address appeared in the central loss or beacon info links.  I 
opened windows/system32/drivers/etc/hosts and added my ip mumber and host name. 
 I  had to do this on my laptop (dhcp) and my node display (static IP)  After 
stopping and starting the beacon, my hostname appeared on the central loss and 
Beacon info pages.  I did these steps after verifying I had traffic leaving to 
the beacon server on ports 10003 thru 10004.  (ethereal)
Thank you,
Mike



Andrew Rowley wrote:

   Hi,

   Are you sure that "Nothing" happens?  Once it is installed, you need to 
click on the "Install Beacon Service (AutoStart)" link and then click on 
"Manually Start Beacon Service".  There will be no output if all goes well.

   To see if the beacon is working, go to http://beacon.dast.nlanr.net/ and 
look down the page for your machine's DNS name and IP address.  It may take a 
couple of minutes to appear.  It should also appear under the link "Beacon 
Info" on this page.

   If this is still not working, you can go to "Control Panel" --> 
"Administrative Tools" --> "Event Viewer" and click on "Application" on the 
left.  This should list any errors from the beacon.

   Andrew G D Rowley :)============================================
   Access Grid Support Centre,
   RSS Group,
   Manchester Computing,
   KilburnBuilding,
   University of Manchester,
   Oxford Road,
   Manchester,
   M13 9PL,
   UK
   Tel: +44(0)161-275 0685
   Email: andrew.row...@manchester.ac.uk

     _____

   From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov] On Behalf 
Of Thomas L. James

   Sent: 05 January 2005 23:42
   To: ag-t...@mcs.anl.gov
   Subject: [AG-TECH] Beacon 1.1 for Windows


   I have tried to install the Python version of Beacon 1.1 for windows with no 
luck.  It installs fine but when I try to run it nothing happens.

   Any suggestions?

   Tom James
   Research Scientist (Network/System Administrator)
   Center for Rural Health Research and Education
   http://www.health.uwyo.edu/
   1.307.766.9602



<<attachment: mwelmore.vcf>>

Reply via email to