http://bugzilla.kernel.org/show_bug.cgi?id=5888
------- Additional Comments From [EMAIL PROTECTED] 2006-02-13 20:35 ------- Hi, I tried 2.6.16-rc3 both echo mem > /sys/power/state and echo standby > /sys/power/state first mem: box went down, usb mouse, video fans shut off. box reacted to power button and came partially back. usb-mouse went on, harddisk and dvd-burner, fans spinned up. Video did NOT came up, keyboard was mixed. The ps/2 keyboard I am using did not react to caps lock, scroll lock, num lock,. the lights stayed off, but it reacted to the sysrq keys, so it was not totally dead. standby: box went down, fans did not stop, there was still a blinking cursor on the monitor. Box came back after pressing power button, I went into X, keyboard, mouse worked fine. Network did not came back properly. It was totally dead after resuming. So this did not change. At least the soft lockup seems to be gone Here is dmesg after standby, before the network-madness started (I forgot to save that .. I only thought about it, when the box was rebooting.. I should be in bed for hours now ;) ) [ 0.000000] Bootdata ok (command line is root=/dev/hda3 gentoo=nodevfs noexec=on nmi_watchdog=1) [ 0.000000] Linux version 2.6.16-rc3 ([EMAIL PROTECTED]) (gcc-Version 3.4.5 (Gentoo 3.4.5, ssp-3.4.5-1.0, pie-8.7.9)) #1 Tue Feb 14 04:24:14 CET 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f9bb0 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x12000506 MSFT 0x00000097) @ 0x000000003ffb0000 [ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x12000506 MSFT 0x00000097) @ 0x000000003ffb0200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x12000506 MSFT 0x00000097) @ 0x000000003ffb0390 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x12000506 MSFT 0x00000097) @ 0x000000003ffc0040 [ 0.000000] ACPI: DSDT (v001 939M2 939M2150 0x00000150 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] On node 0 totalpages: 257488 [ 0.000000] DMA zone: 3046 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254442 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000) [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda3 gentoo=nodevfs noexec=on nmi_watchdog=1 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 2000.116 MHz processor. [ 29.940928] time.c: Using PIT/TSC based timekeeping. [ 29.943026] Console: colour VGA+ 80x25 [ 29.945023] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.945990] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 29.954263] Memory: 1027964k/1048256k available (1939k kernel code, 19612k reserved, 944k data, 156k init) [ 30.030761] Calibrating delay using timer specific routine.. 4004.76 BogoMIPS (lpj=8009526) [ 30.030882] Mount-cache hash table entries: 256 [ 30.031005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 30.031055] CPU: L2 Cache: 512K (64 bytes/line) [ 30.031107] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 30.074019] activating NMI Watchdog ... done. [ 30.074098] Using local APIC timer interrupts. [ 30.124047] result 12500741 [ 30.124091] Detected 12.500 MHz APIC timer. [ 30.126587] testing NMI watchdog ... OK. [ 30.166913] DMI 2.3 present. [ 30.166994] NET: Registered protocol family 16 [ 30.167054] ACPI: bus type pci registered [ 30.167103] PCI: Using configuration type 1 [ 30.167407] ACPI: Subsystem revision 20060127 [ 30.171065] ACPI: Interpreter enabled [ 30.171110] ACPI: Using IOAPIC for interrupt routing [ 30.171903] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 30.171950] PCI: Probing PCI hardware (bus 00) [ 30.174232] PCI quirk: region 0800-083f claimed by ali7101 ACPI [ 30.174594] Boot video device is 0000:01:00.0 [ 30.174916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 30.188022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 30.188264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] [ 30.192400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] [ 30.192593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] [ 30.193220] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. [ 30.193943] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 30.194642] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled. [ 30.195360] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled. [ 30.196077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 30.196753] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 30.197432] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 30.198109] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 [ 30.198830] ACPI: PCI Interrupt Link [LNKP] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 30.199393] SCSI subsystem initialized [ 30.199467] usbcore: registered new driver usbfs [ 30.199532] usbcore: registered new driver hub [ 30.199611] PCI: Using ACPI for IRQ routing [ 30.199658] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 30.200479] PCI: Bridge: 0000:00:01.0 [ 30.200525] IO window: disabled. [ 30.200571] MEM window: f4700000-fe7fffff [ 30.200618] PREFETCH window: b7e00000-d7dfffff [ 30.200665] PCI: Bridge: 0000:00:02.0 [ 30.200709] IO window: disabled. [ 30.200755] MEM window: fe800000-fe8fffff [ 30.200801] PREFETCH window: disabled. [ 30.200847] PCI: Bridge: 0000:00:05.0 [ 30.200892] IO window: disabled. [ 30.200939] MEM window: fe900000-fe9fffff [ 30.200986] PREFETCH window: disabled. [ 30.201034] PCI: Bridge: 0000:00:06.0 [ 30.201080] IO window: d000-dfff [ 30.201127] MEM window: fea00000-feafffff [ 30.201175] PREFETCH window: d7e00000-d7efffff [ 30.201232] GSI 16 sharing vector 0xA9 and IRQ 16 [ 30.201280] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169 [ 30.201371] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 30.201377] GSI 17 sharing vector 0xB1 and IRQ 17 [ 30.201423] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177 [ 30.201514] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.201520] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 30.201526] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 30.201738] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 30.202097] Total HugeTLB memory allocated, 0 [ 30.202240] io scheduler noop registered [ 30.202318] io scheduler anticipatory registered [ 30.202396] io scheduler deadline registered [ 30.202560] io scheduler cfq registered (default) [ 30.250621] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169 [ 30.250715] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 30.250737] assign_interrupt_mode Found MSI capability [ 30.250816] Allocate Port Service[0000:00:01.0:pcie00] [ 30.250849] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177 [ 30.250939] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.250960] assign_interrupt_mode Found MSI capability [ 30.251026] Allocate Port Service[0000:00:02.0:pcie00] [ 30.251107] ACPI: Power Button (FF) [PWRF] [ 30.251162] ACPI: Power Button (CM) [PWRB] [ 30.262900] Real Time Clock Driver v1.12ac [ 30.264557] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 30.264688] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.264800] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.264850] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.264933] ALI15X3: IDE controller at PCI slot 0000:00:12.0 [ 30.264987] GSI 18 sharing vector 0xD1 and IRQ 18 [ 30.265034] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 209 [ 30.265130] ALI15X3: chipset revision 199 [ 30.265175] ALI15X3: not 100% native mode: will probe irqs later [ 30.265232] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio [ 30.265358] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio [ 30.265482] Probing IDE interface ide0... [ 30.553982] hda: SAMSUNG SP1213N, ATA DISK drive [ 31.224628] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 31.224749] Probing IDE interface ide1... [ 31.959361] hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive [ 32.630738] ide1 at 0x170-0x177,0x376 on irq 15 [ 32.630918] hda: max request size: 512KiB [ 32.632815] hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [ 32.633361] hda: cache flushes supported [ 32.633434] hda: hda1 hda2 hda3 hda4 < hda5 hda6 > [ 32.675555] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 32.675853] Uniform CD-ROM driver Revision: 3.20 [ 32.682518] usbmon: debugfs is not available [ 32.682579] usbcore: registered new driver usbhid [ 32.682626] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 32.682708] mice: PS/2 mouse device common for all mice [ 32.682789] NET: Registered protocol family 2 [ 32.717781] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 32.718022] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 32.718704] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 32.719057] TCP: Hash tables configured (established 131072 bind 65536) [ 32.719106] TCP reno registered [ 32.719194] TCP bic registered [ 32.719251] NET: Registered protocol family 1 [ 32.719301] NET: Registered protocol family 17 [ 32.719349] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) [ 32.719497] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) [ 32.719546] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV) [ 32.719595] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xa (1300 mV) [ 32.719645] cpu_init done, current fid 0xc, vid 0x6 [ 32.719779] ACPI wakeup devices: [ 32.719824] HTT PS2K AC97 MC97 LAN USB0 USB1 USB2 UB20 PEB1 PEB2 PEB3 [ 32.720230] ACPI: (supports S0 S1 S3 S4 S5) [ 32.739910] ReiserFS: hda3: found reiserfs format "3.6" with standard journal [ 32.870385] input: AT Translated Set 2 keyboard as /class/input/input0 [ 36.273856] ReiserFS: hda3: using ordered data mode [ 36.286245] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 36.287680] ReiserFS: hda3: checking transaction log (hda3) [ 36.344531] ReiserFS: hda3: Using r5 hash to sort names [ 36.344593] VFS: Mounted root (reiserfs filesystem) readonly. [ 36.344755] Freeing unused kernel memory: 156k freed [ 39.921624] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 across:996020k [ 41.092518] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 41.092756] GSI 19 sharing vector 0xD9 and IRQ 19 [ 41.092759] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 217 [ 41.115058] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:3f:bf:15, irq 217. [ 41.129695] Linux video capture interface: v1.00 [ 41.240185] bttv: driver version 0.9.16 loaded [ 41.240189] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 41.240411] bttv: Bt8xx card found (0). [ 41.240423] GSI 20 sharing vector 0xE1 and IRQ 20 [ 41.240427] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 225 [ 41.240437] bttv0: Bt848 (rev 18) at 0000:04:06.0, irq: 225, latency: 32, mmio: 0xd7eff000 [ 41.240447] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 41.240479] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 42.239991] bttv0: tea5757: read timeout [ 42.239995] bttv0: using tuner=5 [ 42.239998] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 42.242137] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 42.244266] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 42.246389] bttv0: i2c: checking for TDA9887 @ 0x86... not found [ 42.279131] tuner 0-0060: All bytes are equal. It is not a TEA5767 [ 42.279135] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 42.279376] tuner 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 42.316047] bttv0: registered device video0 [ 42.316119] bttv0: registered device vbi0 [ 42.325414] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 42.325631] GSI 21 sharing vector 0xE9 and IRQ 21 [ 42.325634] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 233 [ 42.325780] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 42.326183] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 42.326194] ohci_hcd 0000:00:13.0: irq 233, io mem 0xfebfe000 [ 42.382007] usb usb1: configuration #1 chosen from 1 choice [ 42.382104] hub 1-0:1.0: USB hub found [ 42.382113] hub 1-0:1.0: 3 ports detected [ 42.483668] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 225 [ 42.483778] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 42.484090] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 42.484097] ohci_hcd 0000:00:13.1: irq 225, io mem 0xfebfd000 [ 42.541767] usb usb2: configuration #1 chosen from 1 choice [ 42.541869] hub 2-0:1.0: USB hub found [ 42.541879] hub 2-0:1.0: 3 ports detected [ 42.643386] GSI 22 sharing vector 0x32 and IRQ 22 [ 42.643390] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 50 [ 42.643486] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 42.643796] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 42.643808] ohci_hcd 0000:00:13.2: irq 50, io mem 0xfebfc000 [ 42.701479] usb usb3: configuration #1 chosen from 1 choice [ 42.701582] hub 3-0:1.0: USB hub found [ 42.701592] hub 3-0:1.0: 3 ports detected [ 42.739071] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 42.806512] GSI 23 sharing vector 0x3A and IRQ 23 [ 42.806516] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 58 [ 42.806657] ehci_hcd 0000:00:13.3: EHCI Host Controller [ 42.806691] ehci_hcd 0000:00:13.3: debug port 1 [ 42.827199] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 42.827212] ehci_hcd 0000:00:13.3: irq 58, io mem 0xfebff800 [ 42.827220] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 42.827491] usb usb4: configuration #1 chosen from 1 choice [ 42.827596] hub 4-0:1.0: USB hub found [ 42.827604] hub 4-0:1.0: 8 ports detected [ 43.274050] usb 1-1: device not accepting address 2, error -110 [ 44.008660] usb 4-4: new high speed USB device using ehci_hcd and address 3 [ 44.143108] usb 4-4: configuration #1 chosen from 1 choice [ 44.383112] Initializing USB Mass Storage driver... [ 44.395940] usb 1-1: new full speed USB device using ohci_hcd and address 4 [ 44.560600] usb 1-1: configuration #1 chosen from 1 choice [ 44.566617] hub 1-1:1.0: USB hub found [ 44.569580] hub 1-1:1.0: 4 ports detected [ 44.689552] scsi0 : SCSI emulation for USB Mass Storage devices [ 44.689643] usb-storage: device found at 3 [ 44.689645] usb-storage: waiting for device to settle before scanning [ 44.908928] usb 1-1.4: new low speed USB device using ohci_hcd and address 5 [ 45.024721] usb 1-1.4: configuration #1 chosen from 1 choice [ 45.038759] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 [ 45.038788] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1.4 [ 45.042680] usbcore: registered new driver usb-storage [ 45.042683] USB Mass Storage support registered. [ 47.699030] ReiserFS: hda5: found reiserfs format "3.6" with standard journal [ 49.679643] Vendor: Generic Model: IC1210 CF Rev: 1.9C [ 49.679649] Type: Direct-Access ANSI SCSI revision: 00 [ 49.682808] usb-storage: device scan complete [ 49.991381] sd 0:0:0:0: Attached scsi removable disk sda [ 50.959558] ReiserFS: hda5: using ordered data mode [ 50.978548] ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 50.979881] ReiserFS: hda5: checking transaction log (hda5) [ 51.042210] ReiserFS: hda5: Using r5 hash to sort names [ 55.747718] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) -> IRQ 50 [ 55.751288] Audigy2 value: Special config. [ 59.383639] ali1563: SMBus control = 0403 [ 59.391724] ali1563_probe: Returning 0 [ 59.552967] Driver 'w83627hf' needs updating - please use bus_type methods [ 63.716200] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 82.588240] PM: Preparing system for standby sleep [ 82.589431] Stopping tasks: =========================| [ 82.734050] ACPI: PCI interrupt for device 0000:04:07.0 disabled [ 82.734076] ACPI: PCI interrupt for device 0000:04:06.0 disabled [ 82.734115] ACPI: PCI interrupt for device 0000:00:13.3 disabled [ 82.742047] ACPI: PCI interrupt for device 0000:00:13.2 disabled [ 82.742057] ACPI: PCI interrupt for device 0000:00:13.1 disabled [ 82.742067] ACPI: PCI interrupt for device 0000:00:13.0 disabled [ 82.742145] PM: Entering standby sleep [ 87.286684] Back to C! [ 87.338015] PM: Finishing wakeup. [ 87.338041] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169 [ 87.338045] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 87.338056] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177 [ 87.338060] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 87.338081] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 87.338095] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 87.338122] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 217 [ 87.338134] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 209 [ 87.338138] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 233 [ 87.338149] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 225 [ 87.338161] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 50 [ 87.345857] PCI: Enabling device 0000:00:13.3 (0000 -> 0002) [ 87.345860] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 58 [ 87.345864] PCI: Setting latency timer of device 0000:00:13.3 to 64 [ 87.345905] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 225 [ 87.345909] ACPI: PCI interrupt for device 0000:04:06.0 disabled [ 87.345911] bttv0: Can't enable device. [ 87.353841] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) -> IRQ 50 [ 87.355728] Audigy2 value: Special config. [ 90.399533] ohci_hcd 0000:00:13.0: wakeup [ 90.537913] Restarting tasks... done [ 98.319803] uli526x: eth0 NIC Link is Down [ 98.818636] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 103.310095] eth0: Tx timeout - resetting [ 103.809572] uli526x: eth0 NIC Link is Down (Link is Down, Link is Up, it repeated roughly half a douzend times until I rebooted to be able to post this comment). ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
