http://bugzilla.kernel.org/show_bug.cgi?id=6604
------- Additional Comments From [EMAIL PROTECTED] 2006-05-26 17:34 ------- I pulled a 3COM 3C905C-TXM card from another older linux machine that has WOL working and plugged it into the test machine. After adding the following line to /etc/modprobes.conf options 3c59x enable_wol=1 Rebooting, and then poweroff, the current machine would WOL when a magic packet was sent to this second ethernet card. A magic packet sent to the first ethernet port (the nvidia one) still did nothing. Oddly there didn't seem to be any new entries in /proc/acpi/wakeup, and the WOL worked even though everything in that file was set to disabled. So apparently it isn't ACPI per se that's screwed up. Perhaps this indicates a problem in the forcedeth driver instead? I'm still waiting for a serial port adapter cable so that I can do some kernel debugging. I had 2 of these cables, but both were for a different pin out than is present on the A8N5X. ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
