http://bugzilla.kernel.org/show_bug.cgi?id=9346
------- Comment #23 from [EMAIL PROTECTED] 2007-11-29 19:08 ------- (In reply to comment #21) > Yannick, please post the result of "lspci -nn" and kernel boot log. I'll post > a patch soon. > here it is : ~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60] 01:00.1 Display controller [0380]: ATI Technologies Inc RV370 [Radeon X300SE] [1002:5b70] 03:08.0 Ethernet controller [0200]: Intel Corporation 82801G (ICH7 Family) LAN Controller [8086:27dc] (rev 01) and $ dmesg Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 10 Objects with 0 Devices 4 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6383.99 BogoMIPS (lpj=3191998) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 Total of 2 processors activated (12772.29 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. PCI: PCI BIOS revision 2.10 entry at 0xfb93c, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 1 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:..................................................... Initialized 21/25 Regions 0/0 Fields 8/8 Buffers 24/36 Packages (425 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.<4>ACPI: System BIOS is requesting _OSI(Linux) ACPI: If "acpi_osi=Linux" works better, Please send dmidecode to [EMAIL PROTECTED] .... Executed 5 _INI methods requiring 4 _STA executions (examined 40 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 8 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:01: ioport range 0x800-0x85f has been reserved system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:01: ioport range 0x860-0x8ff could not be reserved system 00:06: iomem range 0x0-0x9ffff could not be reserved system 00:06: iomem range 0x100000-0xffffff could not be reserved system 00:06: iomem range 0x1000000-0x3fe88bff could not be reserved system 00:06: iomem range 0xf0000-0xfffff could not be reserved system 00:07: ioport range 0x100-0x1fe could not be reserved system 00:07: ioport range 0x200-0x277 has been reserved system 00:07: ioport range 0x280-0x2e7 has been reserved system 00:07: ioport range 0x2e8-0x2ef has been reserved system 00:07: ioport range 0x2f0-0x2f7 has been reserved system 00:07: ioport range 0x2f8-0x2ff has been reserved system 00:07: ioport range 0x300-0x377 could not be reserved system 00:07: ioport range 0x380-0x3bb has been reserved system 00:07: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: efd00000-efefffff PREFETCH window: ec000000-edffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: efc00000-efcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: efb00000-efbfffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 2915k freed Simple Boot Flag at 0x7a set to 0x1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Linux agpgart interface v0.102 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered Using IPI No-Shortcut mode Freeing unused kernel memory: 184k freed fuse init (API version 7.9) ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] NET: Registered protocol family 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ff20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 17, io mem 0xffa80800 usb 2-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 usb 5-3: new high speed USB device using ehci_hcd and address 2 ata1.00: ATAPI: BENQ DVD DD DW1640, BSRB, max UDMA/33 usb 5-3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... ata1.00: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM BENQ DVD DD DW1640 BSRB PQ: 0 ANSI: 5 scsi 0:0:0:0: Attached scsi generic sg0 type 5 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 21 ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 21 scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning ata3.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133 ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32) ata3.01: ATA-7: ST3160828AS, 8.04, max UDMA/133 ata3.01: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata3.01: configured for UDMA/133 usb 3-1: new low speed USB device using uhci_hcd and address 2 scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5 scsi 2:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:1:0: Direct-Access ATA ST3160828AS 8.04 PQ: 0 ANSI: 5 scsi 2:0:1:0: Attached scsi generic sg2 type 0 ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 21 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>e100: eth0: e100_probe: addr 0xefbff000, irq 21, MAC addr 00:12:3f:c9:ba:0b usb 3-1: configuration #1 chosen from 1 choice sda1 sda2 sda3 sd 2:0:0:0: [sda] Attached SCSI disk sd 2:0:1:0: [sdb] 312500000 512-byte hardware sectors (160000 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdb] 312500000 512-byte hardware sectors (160000 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 2:0:1:0: [sdb] Attached SCSI disk usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input0 input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.2-1 input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input1 input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb-storage: device scan complete scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0 scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0 scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0 scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0 sd 4:0:0:0: [sdc] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:1: [sdd] Attached SCSI removable disk sd 4:0:0:1: Attached scsi generic sg4 type 0 sd 4:0:0:2: [sde] Attached SCSI removable disk sd 4:0:0:2: Attached scsi generic sg5 type 0 sd 4:0:0:3: [sdf] Attached SCSI removable disk sd 4:0:0:3: Attached scsi generic sg6 type 0 input: PC Speaker as /devices/platform/pcspkr/input/input2 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. input: Power Button (FF) as /devices/virtual/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input4 ACPI: Power Button (CM) [VBTN] Real Time Clock Driver v1.12ac e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Adding 4088532k swap on /dev/sda2. Priority:-1 extents:1 across:4088532k EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.28.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
