http://bugzilla.kernel.org/show_bug.cgi?id=12620
------- Comment #28 from [email protected] 2009-02-15 21:38 ------- Hi, Erik From the attached test it seems that the boot option of "thermal.act=35" is already accepted. But the output of /proc/acpi/thermal_zone/*/* indicates that the boot parameter has no effect. > <polling disabled> > state: ok > temperature: 40 C > critical (S5): 120 C > passive: 120 C: tc1=4 tc2=3 tsp=60 devices=CPU0 >active[0]: 120 C: devices= FAN (If takes effect, the active threshold should be 35 instead of 120). In such case the fan device will be in off-state. > status: off How about the issue if adding the boot option of "thermal.act=-1" and the fan device is put in on-state. > echo 0 > /proc/acpi/fan/FAN/state Thanks. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
