https://bugzilla.kernel.org/show_bug.cgi?id=41762
--- Comment #3 from M. Vefa Bicakci <[email protected]> 2011-08-26 06:12:54 --- Created an attachment (id=70382) --> (https://bugzilla.kernel.org/attachment.cgi?id=70382) dmesg output after the mentioned test To produce this output, the following actions were taken with kernel 3.0.3: # dmesg -c # echo 0x04 > /sys/module/acpi/parameters/debug_layer # echo 0x8800001f > /sys/module/acpi/parameters/debug_level - run "yacpi" - unplug AC adapter - refresh display of "yacpi" - plug in AC adapter - refresh display of "yacpi" I should also note the following: In order to generate the events in dmesg, I had to run the "yacpi" utility and after unplugging/plugging in the AC adapter, I had to refresh the "yacpi" utility's display. "yacpi" reads its information from /proc. If I do not refresh "yacpi"'s display after taking plugging/unplugging the AC adapter, then the kernel does not generate ACPI events. -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
