https://bugzilla.kernel.org/show_bug.cgi?id=41762
M. Vefa Bicakci <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #70382|0 |1 is obsolete| | --- Comment #4 from M. Vefa Bicakci <[email protected]> 2011-08-26 06:33:27 --- Created an attachment (id=70392) --> (https://bugzilla.kernel.org/attachment.cgi?id=70392) dmesg output after the corrected test I just realized that I had not set the debug_level parameter of the acpi kernel module properly before carrying out the test. I am attaching the dmesg output after the steps mentioned below have been carried out. I should also note that this time I did not need to use "yacpi". # dmesg -c # echo 0x04 > /sys/module/acpi/parameters/debug_layer # echo 0x8800001f > /sys/module/acpi/parameters/debug_level - unplug AC adapter - plug in AC adapter The timing is as follows: - 624 seconds after boot, the AC adapter was unplugged. - 643 seconds after boot, the AC adapter was plugged in. -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ acpi-bugzilla mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
