Hi Justin, A restore will only stop Exchange services while the restore is happening. Running ESEUtil only requires that Exchange services be stopped, so you can leave the other services running, serving your users while you are fixing your Exchange problem. Sorry to hear about your last good backup. The next time you experience any indication of corruption, the first thing you will want to secure is your last good backup. This holds true for any transactional database application. Linton -----Original Message----- From: Salandra, Justin A. [mailto:jasalandra@;chcsnet.org] Sent: Tuesday, November 12, 2002 2:52 PM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] OT: Exchange -1018 Error
The reason I am waiting on this is because this server is my forest root, my Exchange server, my DNS server to the Internet, my WINS server and my Intranet Server all in one. If I could find a way to fix the problem quickly while fixing the server online I would avoid down time of all these services. Next years budget allows me to break apart these services -----Original Message----- From: Andy David [mailto:DavidA@;veronissuhler.com] Sent: Tuesday, November 12, 2002 1:40 PM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] OT: Exchange -1018 Error No offense Justin, but what are you waiting for? 1018s are bad news and the sooner you get to work on this and follow PSS's recommendations the better. It will bite you in the a$$ if you attempt to work around this. -----Original Message----- From: Salandra, Justin A. [mailto:jasalandra@;chcsnet.org] Sent: Tuesday, November 12, 2002 12:50 PM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] OT: Exchange -1018 Error When you went through it did you have your users working with out problems. My users are currently experiencing no problems -----Original Message----- From: Al Garrett [mailto:agarrett@;SWC.CC.CA.US] Sent: Tuesday, November 12, 2002 11:16 AM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] OT: Exchange -1018 Error Having been through this myself I'm only going to add my condolences. One of our administrators was using her Deleted Items folder to store all the stuff she wanted to keep. It was a classic from the CDW commercials...."Fred? Where do you put all the e-mail I delete?" Unfortunately, our DLT system had never been tested and our first good backup was a week old. Poor planning on our part. I found myself spending the night in the NOC doing eseutil commands on a 16Gb database and it was taking 6 hours for any successful manipulation. (Copy over network to working drive, perform ese..., recopy back to production drive, test for completeness, etc, etc) I have a 3 inch binder of MS Knowledgebase Articles about recovering Exch5.5. It's been well-thumbed and marked in the margins. Good Luck. Al A small community college in California..... -----Original Message----- From: Burns, Clyde [ mailto:Clyde.Burns@;nortonhealthcare.org <mailto:Clyde.Burns@;nortonhealthcare.org> ] Sent: Tuesday, November 12, 2002 7:19 AM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] OT: Exchange -1018 Error Id go with what MS is recommending. Ive gone both ways (with regards to Exchange 5.5) in restoring a known good database and replaying the transaction logs and having to recover a corrupted database. I would just make sure to copy off all the contents of your exchsrvr\mdbdata contents somewhere else before trying the restore. Worst case then is you can get Exchange back to its current state with a copy of your priv, pub, and log files. Some things to check first though. Go into the advanced tab under the server properties in the 5.5 admin program. (Org -> site -> configuration -> server) See if you have circular logging turned on or off. Ifs its off your ok with restoring the database from tape and replaying the logs. If its on you may lose data by restoring an older priv and pub.edb (though it don't sound like it if you have 500+ separate log files) One other thing to check should you decide to go the 'repair what you have' route. Shut down all your exchange services on the server. Find the path for the following 3 files. Dir.edb pub.edb and priv.edb. Open a command prompt on the server and go the directory where each of those files are at and use the following command eseutil /mh priv.mdb > output.txt Just replace priv.mdb with pub and dir. Open the output.txt file and look about 17 lines down for the "State:" line. If all 3 say Consistent you don't have to worry about the transaction logs. They have been committed to the database. When Exchange 5.5 information store service is shut down it commits the contents of the logs to the database. If the logs are not committed to the database for whatever reason the header dump will show the database to be in an Inconsistent state. Short answer is you could either move all of the edb*.log files out of your mdbdata directory or do away with them manually (definately talk to MS PSS before doing this yourself if your not confortable.) Clyde Burns -----Original Message----- From: Salandra, Justin A. [ mailto:jasalandra@;chcsnet.org <mailto:jasalandra@;chcsnet.org> ] Sent: Tuesday, November 12, 2002 8:59 AM To: ActiveDir (E-mail) Subject: [ActiveDir] OT: Exchange -1018 Error Hello everyone, I know this is off topic but you guys and girls always give good advice. I have been getting event Ids 116, 118 and 200 a lot in my application log. The chain of events went like this I installed SP3 for W2K The next day the Exchange Database went through some type of conversion and logged Event ID 174 hundreds of times (Table/Column/Index Definintions) On that same day one of my Hard Drives in my RAID 5 Config failed, I replaced it 3 days later Since then every time the online maintenance on the exchange database ran it logged a Database Page Cache error (Event ID 116 and 118 and 200) And now ArcServe cannot backup the database fully and commit the logs to the database so I now have 500 log files in my mdbdata directory. MS Support wants me to restore from the day the HD failed after I rename the mdbdata directory and create a new one. Then they want me to copy in all the log files and wait for the log files to replay into the database. The only other option is to do a eseutil or build a new server and migrate everyone over. Have any of you done what MS is recommending? Do any of you feel that this is the way to go? Does anyone know what would of caused these errors, was it SP3 or was it the HD Failure? Any help is appreciated Justin A. Salandra, MCSE Senior Network Engineer Catholic Healthcare System 914.681.8117 office 646.483.3325 cell [EMAIL PROTECTED] < mailto:jasalandra@;chcsnet.org <mailto:jasalandra@;chcsnet.org> > List info : http://www.activedir.org/mail_list.htm <http://www.activedir.org/mail_list.htm> List FAQ : http://www.activedir.org/list_faq.htm <http://www.activedir.org/list_faq.htm> List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ <http://www.mail-archive.com/activedir%40mail.activedir.org/> List info : http://www.activedir.org/mail_list.htm <http://www.activedir.org/mail_list.htm> List FAQ : http://www.activedir.org/list_faq.htm <http://www.activedir.org/list_faq.htm> List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ <http://www.mail-archive.com/activedir%40mail.activedir.org/> ---------------------------------------------------------------------------- -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. ============================================================================ ==
<<application/ms-tnef>>
