RE: [ActiveDir] Two Questions

[Rutherford, Robert]

Title: Message

Oh OK.. didn't realise you were on publics.   The only thing to watch is that your DC's register correctly.. which they usually do. I have performed many range changes and it's straight forward from the AD side. I always prefer to physically bounce a DC after changing it's IP but that's about it.   BR   Rob -----Original Message----- From: John Parker [mailto:[EMAIL PROTECTED] Sent: 21 May 2004 16:48 To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] Two Questions Thanks Robert for your reply.   We are rolling over to a new ISP and have been wanting to get my workstations off of public IP’s.  For security reasons. That’s the reason for the NAT.   I only have two DC’s   John Parker, MCSE IS Admin. Senior Technical Specialist Alpha Display Systems. Alpha Video 7711 Computer Ave. Edina, MN. 55435   952-896-9898 Local 800-388-0008 Watts 952-896-9899 Fax 612-804-8769 Cell 952-841-3327 Direct [EMAIL PROTECTED] "Be excellent to each other" ---End of Line---   -----Original Message----- From: Rutherford, Robert [mailto:[EMAIL PROTECTED] Sent: Friday, May 21, 2004 8:53 AM To: [EMAIL PROTECTED] Subject: RE: [ActiveDir] Two Questions   1) No problems. 2) When you say u are incorporating NAT.. for what reason? Purely for internet access? Why do you need to change your internal range to use NAT?    Chnaging your range isn't really too much of an issue... you just need to make sure you plan it out first, i.e. making sure DC's register correctly, getting DHCP over, blah, blah.   BR   Rob -----Original Message----- From: John Parker [mailto:[EMAIL PROTECTED] Sent: 21 May 2004 13:22 To: [EMAIL PROTECTED] Subject: [ActiveDir] Two Questions Hello again out there!   1) I am replacing our 10/100 card on my AD box with gigabit.  Other than setting the IP info to match the what it was on the 10/100 card,  is there anything else I need to do/watch out for to ensure safe and uniterrupted communication once I set the card up?   2)  On the same system, in a couple months we are rolling over to a new ISP and incorporating NAT.  Any recommended ways of doing this?  I am hitting the books and touching the world on this one, just curious if there are any white papers on this?  What is the best way to NAT the Network?  Are there any AD issues with the change in our Class C? etc. Any input would be appreciated.     Thank you again.       John Parker, MCSE IS Admin. Senior Technical Specialist Alpha Display Systems. Alpha Video   The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any use (including retransmission or copying) of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient of this transmission, please contact the sender and delete the material from any computer. The sender is not responsible for the completeness or accuracy of this communication as it has been transmitted over a public network. Any replies to this email may be monitored by the MCPS-PRS Alliance for quality control and other purposes. The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any use (including retransmission or copying) of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient of this transmission, please contact the sender and delete the material from any computer. The sender is not responsible for the completeness or accuracy of this communication as it has been transmitted over a public network. Any replies to this email may be monitored by the MCPS-PRS Alliance for quality control and other purposes.