just to use the PMC no schema change is needed... however, to deploy printer connections through GPOs and thus create corresponding objects in AD (under the GPO used to deploy the printer connection) you need to extend the schema Met vriendelijke groeten / Kind regards, Ing. Jorge de Almeida Pinto Senior Infrastructure Consultant MVP Windows Server - Directory Services LogicaCMG Nederland B.V. (BU RTINC Eindhoven) ( Tel : +31-(0)40-29.57.777 ( Mobile : +31-(0)6-26.26.62.80 * E-mail : <see sender address>
________________________________ From: [EMAIL PROTECTED] on behalf of Susan Bradley, CPA aka Ebitz - SBS Rocks [MVP] Sent: Sun 2007-01-14 22:12 To: [email protected] Subject: Re: [ActiveDir] R2 Schema (for those on the off chance interested in the SBS impact) While SBS's "r2" release does not give you the functionality of the real R2 bits, to have DFSRv2 on member servers you have to bump the schema on the SBS DC. The only parts of the real "r2" that SBS 2003 R2 gets is FSRM and MMC 3.0. http://blogs.technet.com/sbs/archive/2006/02/28/420825.aspx More tech details there. The printer management console doesn't need a schema update that I recall.. you just need the R2 install on that server. I don't remember (don't think) I did anything on my DC when I enabled the Printer Management console on the member server. Vinnie Cardona wrote: Excellent. Thank you. ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Almeida Pinto, Jorge de Sent: Saturday, January 13, 2007 4:42 AM To: [email protected] Subject: RE: [ActiveDir] R2 Schema the AD schema is (must be) extended with the R2 stuff when either: * you want to install R2 on a DC * you want to use R2 functionalities like DF, S-R, PMC, UnixIDm, etc. Met vriendelijke groeten / Kind regards, Ing. Jorge de Almeida Pinto Senior Infrastructure Consultant MVP Windows Server - Directory Services LogicaCMG Nederland B.V. (BU RTINC Eindhoven) * Tel : +31-(0)40-29.57.777 * Mobile : +31-(0)6-26.26.62.80 * E-mail : <see sender address> ________________________________ From: [EMAIL PROTECTED] on behalf of Vinnie Cardona Sent: Sat 2007-01-13 06:31 To: [email protected] Subject: RE: [ActiveDir] R2 Schema Thank you Jorge...I was just a bit puzzled by one of the lines in the doc on the CD which states that the schema is only extended if you are planning on installing W2K3r2 on a W2K3 DC. I am still in the process of reading up on W2K3r2 and DFS and thanks to you and Hunter which sent me the link to the DFS requirements...I now understand more on the requirements. Thank you all for your help. Really do appreciate it. -vC ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Almeida Pinto, Jorge de Sent: Friday, January 12, 2007 4:46 PM To: [email protected] Subject: RE: [ActiveDir] R2 Schema although the file servers are R2 because of the use of DFS-R (new replication mechanism), you MUST extend the AD schema so that the DFS-R information can be stored in AD Met vriendelijke groeten / Kind regards, Ing. Jorge de Almeida Pinto Senior Infrastructure Consultant MVP Windows Server - Directory Services LogicaCMG Nederland B.V. (BU RTINC Eindhoven) * Tel : +31-(0)40-29.57.777 * Mobile : +31-(0)6-26.26.62.80 * E-mail : <see sender address> ________________________________ From: [EMAIL PROTECTED] on behalf of Vinnie Cardona Sent: Sat 2007-01-13 00:05 To: [email protected] Subject: RE: [ActiveDir] R2 Schema Interesting. I have a similar situation. But in my case they want me to roll out R2 on 10 of my W2K3sp1 file and print servers to take advantage of DFS. After reading the installation docs from the CD it appears to me that I don't have to extend the schema because the servers I will be upgrading are not DCs...would like a reassurance that this is indeed the case with the community... -many thanks -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Isenhour, Joseph Sent: Friday, January 12, 2007 3:11 PM To: [email protected] Subject: [ActiveDir] R2 Schema I have a customer that is really pushing to have the R2 schema loaded in our W2K3 SP1 environment. The plan is to take advantage of the new DFS extensions. We don't have any plans to upgrade to R2 in the foreseeable future so we'd basically be running W2K3 with the R2 schema for several months or years. Does anyone see any potential issues with that? List info : http://www.activedir.org/List.aspx List FAQ : http://www.activedir.org/ListFAQ.aspx List archive: http://www.activedir.org/ma/default.aspx List info : http://www.activedir.org/List.aspx List FAQ : http://www.activedir.org/ListFAQ.aspx List archive: http://www.activedir.org/ma/default.aspx This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. List info : http://www.activedir.org/List.aspx List FAQ : http://www.activedir.org/ListFAQ.aspx List archive: http://www.activedir.org/ma/default.aspx
<<winmail.dat>>
