Not to overlook the obvious, but after you set all the batch capture clips, are you going into the Project bin and selecting all the offline clips before you hit the F6 key? If you don't have all your clips selected, Premiere won't know what to batch capture.
Good luck, Glen in Vegas -----Original Message----- From: vthiker1999 [mailto:[EMAIL PROTECTED] Sent: Sunday, March 13, 2005 5:51 PM To: [email protected] Subject: [AP] Batch Capture Problems I'm having trouble using the batch capture feature when attempting to transfer video from my camera (Samsung) via firewire. When I have the Capture screen open I can manually press the record button and Premier will start transferring video/audio. Pressing stop causes the pop up logging screen to appear. That part works ok. What doesn't work is when I set an inpoint and outpoint, and then the logging info. I continue to do this for a tape and then press F6 to batch capture everything. I'm getting errors telling me the inpoint was not found. Plus the Capture screen is blank during this process. So basically the manual mode of transfer works, the batch transfer features doesn't. Any ideas? Thanks Bill -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Adobe-Premiere/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
