Hello Efim I run the process on another ESXi and no problem the machine was created successfully.
I will check with the VMware administrator the status of the iSCSI on this specific EXSi By the way another question , after the process finished successfully I check in the Instant Access/Restore Status windows but got " No data to display" The new machine is power on and working ? I did the process with full vm Instant Access instead full vm instant restore , and when finished successfully I check in Instant Access/Restore Status and seethe machine waiting to be dismount. Best Regards Robert -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Efim Sent: Thursday, July 27, 2017 10:32 AM To: [email protected] Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523 Hi, did you configure iSCSI on ESXi and set VMISCSIServeraddress on datamover? Efim > 27 июля 2017 г., в 9:49, [email protected] <[email protected]> > написал(а): > > Hello All > > Tried the new feature on TSM for VE 8.1.0.1 in the Restore section called > "Full VM Instant Restore" . Here what I got running this command. > > Error Or Warning Messages: > • ERROR ANS2421E Cannot detect the iSCSI initiator. > • ERROR ANS2411E Instant Restore/Access of virtual machine 'Test1' > failed with rc = 6523 • ERROR ANS2421E (RC6523) Cannot detect the iSCSI > initiator. > > I Check on my TSM server , the iSCSI initiator is ON , I can see the > iqn id on the Configuration tab in the iSCSI properties > > I know I miss something but what ?. > > Any suggestion , tip what to look ? > > Best Regards Robert
