I correct understood that you try to instant restore VM and can't see the current restore process status in the Restore -> Instant Access/Restore Status? Efim
> 27 июля 2017 г., в 11:14, [email protected] <[email protected]> > написал(а): > > Hello Efim > > I run the process on another ESXi and no problem the machine was created > successfully. > > I will check with the VMware administrator the status of the iSCSI on this > specific EXSi > > By the way another question , after the process finished successfully I check > in the Instant Access/Restore Status windows but got " No data to display" > > The new machine is power on and working ? > > I did the process with full vm Instant Access instead full vm instant restore > , and when finished successfully I check in Instant Access/Restore Status and > seethe machine > waiting to be dismount. > > Best Regards Robert > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Efim > Sent: Thursday, July 27, 2017 10:32 AM > To: [email protected] > Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523 > > Hi, > did you configure iSCSI on ESXi and set VMISCSIServeraddress on datamover? > Efim > > >> 27 июля 2017 г., в 9:49, [email protected] <[email protected]> >> написал(а): >> >> Hello All >> >> Tried the new feature on TSM for VE 8.1.0.1 in the Restore section called >> "Full VM Instant Restore" . Here what I got running this command. >> >> Error Or Warning Messages: >> • ERROR ANS2421E Cannot detect the iSCSI initiator. >> • ERROR ANS2411E Instant Restore/Access of virtual machine 'Test1' >> failed with rc = 6523 • ERROR ANS2421E (RC6523) Cannot detect the iSCSI >> initiator. >> >> I Check on my TSM server , the iSCSI initiator is ON , I can see the >> iqn id on the Configuration tab in the iSCSI properties >> >> I know I miss something but what ?. >> >> Any suggestion , tip what to look ? >> >> Best Regards Robert
