Gill -
I've done this (albeit not on a TSM server), and, although there might be a
command you could enter at the command line to make these changes, you can also
easily do this using smit. If you enter 'smit tcpip', then select 'Minimum
Configuration & Startup', then select your network interface from the list,
you'll be able to change the host's IP address, network mask, default gateway
address - even your name server's IP address. And, if you change 'Start Now' to
'Yes', I don't think you'll need to IPL the box.
A couple of caveats, though (from experience) - after you make the changes in
smit, check your /etc/hosts & /etc/resolv.conf files. smit seems to not clean
up the old entries in these files and instead just adds the new entries. You'll
want to remove the reference in /etc/hosts to the host's old IP address, and, if
you changed name servers, remove the reference to the old name server in
/etc/resolv.conf. Not doing this can cause you grief (in my case, NIS freaked
out).
I hope this helps! Good luck.
Tom Tracy
Sr. Database Administrator (& AIX Systems Administrator & TSM
Administrator.....)
NTRS, LLC
[EMAIL PROTECTED]
From: "Gill, Geoffrey L." <[EMAIL PROTECTED]> on 07/02/2001 06:22 PM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc: (bcc: Tom Tracy/ATL/NTRS)
Subject: Change IP Address
For the AIX crowd out there,
I need to change the IP address on my ADSM server this weekend. I want to
know if there are any pitfalls I should look out for. It's not just an IP
change on the same network, I'll be changing the IP, NETMASK and Default
Gateway.
Questions:
Since I'm not totally AIX literate yet is there a command line command I can
use that will do all 3 at once?
Should I plan on rebooting the box after this change?
Thanks for the help.
Geoff Gill
TSM Administrator
NT Systems Support Engineer
SAIC
E-Mail: [EMAIL PROTECTED]
Phone: (858) 826-4062
Pager: (888) 997-9614
